Roof Restoration

First your roof is cleaned using at least 3000 psi of pressure to remove dirt, grime and moss build up in preparation for painting.Your ridges, valleys and gables are then Re-Bedded where any unstable cement is present and fully Re-Pointed using an acrylic flexible pointing compound (as per Australian standards on new roofs). It is also recommended that we change any rusted valley irons at this point. Next up we replace all your broken tiles. Your roof is blown down and your gutters are cleaned. We then prime your roof with a high quality primer so that the paint will adhere to the tiles with the strongest possible bond.We then spray 2 to 4 coats of Nutech arcrylic roof paint depending on the condition of the tiles and of our clients choice, whilst allowing about an hour to dry in between applications. We then spend as much time as it takes to make sure you and your neighbours properties are left clean and tidy.