The EurotestPV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I - U characteristic, Calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.
Measurements on DC side of PV installation:Voltage, current, power, energy;
Uoc (Open Circuit Voltage) and Isc (Short Circuit Current);
I - U curve of PV modules and strings;
Measurements on AC side of PV installation (power quality):
Voltage, current, frequency, power, PF, energy, harmonics;
Efficiency of PV module, inverter, PV system calculation.
Continuity of PE conductors;
Loop impedance (sub-functions with high current and without RCD tripping);
RCD testing (type AC, A and B);
AC current (load and leakage);
TRMS voltage, frequency, phase sequence;
Power, energy, harmonics.
Calculation of STC values;
Graphical representation of module’s I - U curve;
2 voltage & 2 current channels for simultaneous AC & DC parameters measurements;
Optional PV Remote Unit for simultaneous measurements of solar irradiation and temperature of PV module.
Automated RCD testing procedure;
Support for B type RCD;
Earth resistance measurement;
Built-in fuse tables for automatic evaluation of the line / loop impedance results;
Online monitoring of all 3 voltages;
Loop impedance test without tripping the RCD;
1-phase power and energy measurements (including harmonics up to 11th).