Optimised safety and security measures

Optimised safety and security measures from Magnetic Automation Pty Ltd - WA

By: Magnetic Automation Pty Ltd - WA  08-May-2015
Keywords: Security, Safety, Access Control

Magnetic Automation recently installed light curtains on an MCG Cantilever Gate at a high-end security facility. The site required additional safety measures to be installed at the gate entrance due to the varying types of vehicles accessing this entrance. Due to the diversity of sizes and shapes of vehicles, on the odd occasion, particular vehicles were not being detected by the existing PE beams and underground loops. The solution was to install light curtains which definitively detect anything going through the gate entrance/exit. The light curtains works in conjunction with the existing PE Beams and ground loops to safeguard against accidental closing of the sliding gates. The light curtains installed on site contains about 150 PE beams which criss-cross through the opening, detecting everything that goes through the gates. Operating through 32 channels and an active area of 1400mm with criss-crossing beams – no trucks or any types of vehicles can go through without being detected. A further feature of this installation was a customised 3-tier card reader bollard which was fully integrated with the site’s access security system. For more information regarding our PE beams, light curtains, card reader bollards or any other Magnetic Automation products, please contact our head office on 1300 364 864 or email [email protected]

Keywords: Access Control, Bollard, Cantilever Gate, Card Reader, Magnetic Automation, Perimeter Protection, Safety, Security

Contact Magnetic Automation Pty Ltd - WA

Email

Print this page

Other news and updates from Magnetic Automation Pty Ltd - WA

25-Sep-2015

Perimeter protection solution

Magnetic’s MCG cantilever gate is the perfect solution for your perimeter protection needs.


Multi-functional swing gates for varied access types from Magnetic Automation Pty Ltd - WA thumbnail
25-Sep-2015

Multi-functional swing gates for varied access types

Magnetic Automation installed two 5-metre MSG swing gates for a quarry site.


High duty cycle with minimal maintenance requirements from Magnetic Automation Pty Ltd - WA thumbnail
25-Sep-2015

High duty cycle with minimal maintenance requirements

Magnetic Automation’s MHTM Parking Pro boom gates provided a solution for a major university car park.


25-Sep-2015

Dispersing of foot traffic

Magnetic’s MPT Full Height Turnstile is the perfect solution to minimise a rush of people to a particular area.


Fully customisable MCG XL cantilever gate from Magnetic Automation Pty Ltd - WA thumbnail
25-Sep-2015

Fully customisable MCG XL cantilever gate

To accommodate a wide opening space for a coal export site, Magnetic Automation installed a 12-metre MCG XL cantilever gate with Magnetic's powerful MSL 20MC motor.


Secure, reliable & efficient from Magnetic Automation Pty Ltd - WA thumbnail
25-Sep-2015

Secure, reliable & efficient

A 7 metre Magnetic track gate was installed at a distribution centre. The customer required an automatic gate to replace


MHG flat-packed and perfect for transporting to anywhere in Australia. from Magnetic Automation Pty Ltd - WA thumbnail
07-Aug-2015

MHG flat-packed and perfect for transporting to anywhere in Australia.

The MHG gate does not require tracks above or below the gate, significantly reducing the time taken for installation - approximately 2 days.


Restricted gate run-off constraints from Magnetic Automation Pty Ltd - WA thumbnail
07-Aug-2015

Restricted gate run-off constraints

Magnetic recently installed an off-set bi-parting MTG gate for a bus terminus yard.


Service and Preventative Maintenance program from Magnetic Automation Pty Ltd - WA thumbnail
07-Aug-2015

Service and Preventative Maintenance program

A Preventative Maintenance Program is one of the most important aspects of any automation system. Performing proactive servicing can help to minimise the risk of breakdowns and associated safety issues.


07-Aug-2015

Pedestrian entry and exit system

Six Magnetic MPR retractable barriers were recently installed for a transport provider. The entry and exit points both had two standard width barriers and one wide width barrier to accommodate large volumes of traffic thoroughfare.


Sustainable resource industry facility from Magnetic Automation Pty Ltd - WA thumbnail
24-Jul-2015

Sustainable resource industry facility

Two STG heavy-duty cantilever gates and an MPT pedestrian turnstile were recently installed by Magnetic Automation for an oil and gas plant.


Solar powered vehicle traffic management solution from Magnetic Automation Pty Ltd - WA thumbnail
24-Jul-2015

Solar powered vehicle traffic management solution

Solar powered vehicle traffic management solution - A Magnetic boom gate was installed in the staff car park of a health care facility.


26-Jun-2015

Long lasting products designed for harsh conditions

Magnetic recently completed a job for a gas plant construction site which included manufacturing and installing our MPP Pedestrian turnstiles.


Perimeter security for an airport service provider from Magnetic Automation Pty Ltd - WA thumbnail
26-Jun-2015

Perimeter security for an airport service provider

The MTT Track gate is ideal for areas with restricted run-off area to accommodate the gate length requirement, with the layout of the site, this was the perfect solution for the client. The advantage of the telescopic design is that it allows approximately twice the opening width into a reduced run-off space.


Rail Stabling gates from Magnetic Automation Pty Ltd - WA thumbnail
08-May-2015

Rail Stabling gates

Magnetic has developed a high security gate design for train stabling yards. The purpose of the gate is to prevent vandals and pedestrians accessing trains when they are not operational.