Silicone Self Fusing Insulating Tape

Silicone Self Fusing Insulating Tape from bstfiresleeve

By: bstfiresleeve  08-Aug-2014
Keywords: Silicone Tape, Silicone Insulating Tape, Silicone Self Fusing Insulating Tape,

Silicone Self Fusing Insulating Tape is extruded of 100% high performance silicone elastomer. Ingredients in the silicone cause it to permanently bond to itself when stretched and over-wrapped to itself. Silicone Self Fusing Insulating Tape • self-fusing, has no residue, never gets gummy or sticky like electrical or duct tape! • Has great tensile strength of >4.9Mpa(700psi), minimum elongation is >200%! • Withstands temperature up to 260℃(500℉), remains flexible to -30℃(-85℉)! • Has electrical strength of >20Mv/m, even under temp of 180℃(356℉) or in oily! • Creates a permanent air-tight, water-tight seal shortly; Tighter stretch, quicker bond! • Resists fuels, oils, acids, solvents, salt water, road salt, UV rays! • extremely versatile, has an unbelievably long shelf life! • Also named end wrap tape, pyrosil tape, rescue tape, silicon tape, insulation tape! Application: Our Silicone Self Fusing Insulating Tape is super versatile and application seems infinite due to people's wisdom never ends growing. • Typically used as firesleeve free ends seal, or secure firetape into position at the ends and intervals. • Wrap hydraulic fittings and other exposed metal connections to help prevent corrosion. • Keep it on board vehicles & equipment for emergency hose repair. • Seal leaky hoses, pipes, tubing, lines, & fittings. • Neaten up lines and extension cords in stowage. • Wrap tools and handles for a great non-slip grip. • Wrap wiring harnesses and custom split-looming. • Waterproof electrical connections and terminals. • Works even over wet, dirty, or oily surfaces. • And much much more, wrap to anything you want to secure, no residue at all Direction: • Wrap around the object by stretching and overlapping onto itself by at least 30% elongation. For high pressure leaks, stretch to maximum, The tighter wrapped, the quicker and stronger bonds. • Continue wrapping around object by overlapping 50% onto itself so that half the width is covered with the next wrap. The first and last wrap should completely overlap onto the previous wrap for a complete bond. • Additional layers may be necessary, and the same process should be used over the previous layers. It works on either side.Additional silicone tape can be applied over project at any time in the future. • For high pressure leaks, additional wrapping may be required. Most hose repairs can be repaired with 3-5 layers in thickness, and wrapping 3 to 5 inches in each direction away from the leak; however, additional strength can be added simply by wrapping more silicone tape. • For electrical wiring, it is not necessary to stretch tightly. In fact, it will be more resilient to abrasion when it is not stretched as tightly.

Keywords: Silicone Insulating Tape, Silicone Self Fusing Insulating Tape, Silicone Self Fusing Tape, Silicone Tape,

Other products and services from bstfiresleeve

Aluminum Carbonized Felt Blanket from bstfiresleeve thumbnail
19-Feb-2016

Aluminum Carbonized Felt Blanket

Aluminum Carbonized Felt Blanket is Good sewing performance: soft and moderate strength and good extensibility, light weight, feel is good.


Silica Fiber Insulation Felt from bstfiresleeve thumbnail
19-Feb-2016

Silica Fiber Insulation Felt

BST-SIM Silica Fiber Insulation Felt made by 96% silica fiberglass chopped strand through carding and needling process.


basalt fiber sleeve from bstfiresleeve thumbnail
03-Apr-2015

basalt fiber sleeve

Texturized basalt fiber sleeve is a highly conformable sleeve which provides excellent thermal protection for engine and generator exhaust piping for automobiles, marine engines and generators, bus, construction and mining equipment.


high temperature silica sleeve from bstfiresleeve thumbnail
03-Apr-2015

high temperature silica sleeve

Texturized high temperature silica sleeve is made of 96% pure SiO2 texturized silica fiber yarn, it is suitable for continuous use at 2000F (1100C), and able to withstand short time temp. exposure up to 3000F (1650C).


silica fiber braided sleeve from bstfiresleeve thumbnail
03-Apr-2015

silica fiber braided sleeve

Texturized silica fiber braided sleeve is made of 96% pure SiO2 texturized silica fiber yarn, it is suitable for continuous use at 2000F (1100C), and able to withstand short time temp. exposure up to 3000F (1650C).


high temperature basalt sleeve from bstfiresleeve thumbnail
03-Apr-2015

high temperature basalt sleeve

The Texturized basalt braided sleeve is a 100% inorganic, mineral, continuous filament with an excellent high temperature and shock resistance. Basalt fiber is similar to carbon fiber and fiberglass, but basalt has better mechanical properties than fiberglass and is lower in cost than carbon fiber. The Texturized basalt braided sleeve is easy to install and will provide years of protection and good looks.


black colored fiberglass exhaust wrap from bstfiresleeve thumbnail
20-Mar-2015

black colored fiberglass exhaust wrap

BSTFLEX black colored fiberglass exhaust wrap is made by fiberglass, width 25, 50, 75, 100, 150, 200 mm. This black colored fiberglass exhaust wrap resistant high temperature, thickness from 1mm to 5mm.


Texturized Fiberglass Sleeve from bstfiresleeve thumbnail
02-Mar-2015

Texturized Fiberglass Sleeve

Texturized Fiberglass Sleeve withstands continuous exposure to temperatures of 1000°F, is resistant to common industrial fluids and chemicals, and is a completely asbestos-free, non-hazardous insulation sleeve.


Cable and Hose Heat Protection from bstfiresleeve thumbnail
02-Mar-2015

Cable and Hose Heat Protection

BSTFLEX Cable and Hose Heat Protection is designed to afford protection against radiant heat, this aluminium and glass fibre constructed tube can be used to shield a wide variety of pipes, tubes and cables.


Fire Protection Fiberglass Sleeving from bstfiresleeve thumbnail
22-Feb-2015

Fire Protection Fiberglass Sleeving

Fire Protection Fiberglass Sleeving is a common term for a Silicone coated fiberglass sleeve, generally used in industrial or aerospace applications.


high temperature fire sleeve from bstfiresleeve thumbnail
11-Feb-2015

high temperature fire sleeve

Silicone coated fiberglass high temperature fire sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).


heat resistant fire sleeve from bstfiresleeve thumbnail
11-Feb-2015

heat resistant fire sleeve

heat resistant fire sleeve protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F. Made of braided fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.


silicone fiberglass braided fire sleeve from bstfiresleeve thumbnail
11-Feb-2015

silicone fiberglass braided fire sleeve

silicone fiberglass braided fire sleeve is the perfect cover to protect hydraulic hoses,pneumatic lines and wiring bundles.


silicone rubber fiberglass fire sleeve from bstfiresleeve thumbnail
11-Feb-2015

silicone rubber fiberglass fire sleeve

silicone rubber fiberglass fire sleeve is the perfect cover to protect hydraulic hoses,pneumatic lines and wiring bundles.


hose protection fire sleeve from bstfiresleeve thumbnail
11-Feb-2015

hose protection fire sleeve

hose protection fire sleeve is the perfect cover to protect hydraulic hoses,pneumatic lines and wiring bundles.