firesleeve performance and sizes

firesleeve performance and sizes from bstfiresleeve

By: bstfiresleeve  13-Aug-2014
Keywords: Firesleeve

500°F/260°C Continuous Exposure: Higher Intermittent Firesleeve with Velcro Hook Loop Closure Braided high bulk fiberglass sleeve with Velcro hook-and-loop closure. Ideal choice for easy retrofits. Firesleeve with Velcro Hook Loop Closure is designed to protect hoses,wires and cables from the hazards of high heat and occasional flame. Using high temperature thread, a flame retardant hook-and-loop velcro closure system is sewn internally. Install without disconnecting hoses or cables. Firesleeve with Velcro Hook Loop Closure protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F.Made of knitted fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber. Resistant to hydraulic fluids, Lubricating oils, and fuels, Silicone Sleeve insulates against energy loss in piping and hosing;protects employees from burns; and allows bunding of wires, hoses, and cables. Firesleeve with Velcro Hook Loop Closure is the perfect cover to protect hydraulic hoses,pneumatic lines and wiring bundles. Firesleeve with Velcro Hook Loop Closure can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product Proudly Made By BST Thermal Protection Products Co.,Ltd Firesleeve with Velcro Hook Loop Closure - Quick Facts Custom colours available by special order. Continuous operating temp: 500°F (260°C) Max short term exposure: 3000°F (1650°C) Molten splash resistance: Outstanding Flame resistance: Very good Abrasion resistance: Very good Flexibility: Outstanding Water and oil resistance: Outstanding

Keywords: Firesleeve

Other news and updates from bstfiresleeve

Heat Protection Tube from bstfiresleeve thumbnail
25-Sep-2014

Heat Protection Tube

This Corrugated Heat Protection Tube is made by aluminium, stainless steel, coated glass-fibre, PET-Fleece, paper, insulation material.


Titanium T4 Turbo Blanket from bstfiresleeve thumbnail
17-Sep-2014

Titanium T4 Turbo Blanket

Titanium T4 Turbo Blanket Materials: With an outer layer made from actual pulverized volcanic lava rock (continuous-filament basalt) formed into fabric and woven into a tight mesh weave, these turbo blankets are internally insulated with high temperature calcium magnesium silicate wool, overlaid with a high temperature silica fabric for increased durability and for improved thermal resistance.


Aluminized Heat Shield Mat from bstfiresleeve thumbnail
11-Sep-2014

Aluminized Heat Shield Mat

Aluminized Heat Shield Mat will help to keep what needs to stay cool, cool or the opposite. The flexible aluminum shielding material makes it so it can be used anywhere from the firewall, to the outside of an air intake tube to a exhaust manifold for a heat shield. Our Aluminized Heat Shield Blanket can withstand temperatures of up to and over 2000 degrees Fahrenheit.


Thermal Heat Shield sleeve from bstfiresleeve thumbnail
10-Sep-2014

Thermal Heat Shield sleeve

Thermal Heat Shield sleeve is made by fiberglass and capable of withstanding 1200°F continuous and this nonflammable sleeve has a special weave that allows it to expand and contract over fittings and terminals.


96 OZ Silicone Coated Fiberglass Blanket from bstfiresleeve thumbnail
05-Sep-2014

96 OZ Silicone Coated Fiberglass Blanket

Our heavy weight 96 OZ Silicone Coated Fiberglass Blanket (3260 g/m2) is constructed from a glass fiber base fabric, coated one side only with a very thick layer of specially compounded silicone rubber that sheds molten splash almost instantly, before heat transfer can occur.


5 mm Silicone rubber coated fiberglass blanket from bstfiresleeve thumbnail
04-Sep-2014

5 mm Silicone rubber coated fiberglass blanket

High temperature, heat and flame resistant BST Heavy Duty Silicone Coated Fiberglass Fabric is the perfect choice for protecting a variety of hoses, lines, wires, cables and equipment assemblies such as electronic enclosures, valves, robotic arm and elbow protection, etc., from exposure to high and extreme heat conditions.


Heat Reflective Aluminized Fiberglass Sleeve from bstfiresleeve thumbnail
03-Sep-2014

Heat Reflective Aluminized Fiberglass Sleeve

Heat Reflective Aluminized Fiberglass Sleeve is a highly flexible aluminized low bulk fiberglass sleeving used to protect components in high temperature areas. The outer aluminum finish is highly reflective while the inner layer of fiberglass greatly increases insulating efficiency.


Expandable Acrylic Saturated Fiberglass Thermo Sleeve from bstfiresleeve thumbnail
02-Sep-2014

Expandable Acrylic Saturated Fiberglass Thermo Sleeve

Designed to expand and contract by approximately 25% of its nominal size, the smooth glass fiber yarn is heat cleaned and coated with an acrylic saturant to eliminate loose fibers, enhance handling characteristics, and improve abrasion resistance. The acrylic saturant begins to decompose around 400°F (204°C), but with no effect on the thermal performance of the sleeve.


Nylon Protective Hose Sleeving from bstfiresleeve thumbnail
02-Sep-2014

Nylon Protective Hose Sleeving

Nylon Protective Hose Sleeving Features and Benefits: Protects against physical abrasion, damage and deterioration Meets ISO 6945 abrasion standards Provides limits burst and containment protection Extremely durable and flexible Nylon Guaranteed to fit your specific application Multiple round ID width available


Heat Reflective Sleeve Application from bstfiresleeve thumbnail
28-Aug-2014

Heat Reflective Sleeve Application

Heat Reflective Sleeve is typically used to cover / protect: Engine wire harnesses Hoses and tubing A/C line Hydraulic and fuel lines Control cables


heat resistant sleeving from bstfiresleeve thumbnail
26-Aug-2014

heat resistant sleeving

Heat resistant sleeving protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F. Made of braided fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.


Knitted Firesleeve from bstfiresleeve thumbnail
23-Aug-2014

Knitted Firesleeve

Knitted Firesleeve protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F.Made of knitted fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.


Fire Sleeve with Velcro from bstfiresleeve thumbnail
23-Aug-2014

Fire Sleeve with Velcro

Fire sleeve with Velcro Hook Loop Closure protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F. Made of knitted fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.


Fire sleeve from bstfiresleeve thumbnail
16-Aug-2014

Fire sleeve

Fire sleeve is used as a protective sleeve on industrial hoses, hydraulic hoses, cables, wires, etc. Fire sleeve generally refers to two variations: An aerospace version is made with a braided fiberglass substrate and is commonly used in the aerospace industry. Its construction enables qualified hose assemblies to meet the SAE standards which have been established relative to the protection which this product provides.


T3 Turbo Blanket from bstfiresleeve thumbnail
14-Aug-2014

T3 Turbo Blanket

BSTFLEX Fiberglass T3 Turbo Blanket Heat Tolerance: Interior Surface: Max Temperature Rating: 2012 Deg F / 1100 Deg C Continuous Use Limit: 1832 Deg F / 1000 Deg CExterior Surface: Direct Contact Limit: 600 Deg F / 316 Deg C Radiant Heat Limit: 1100 Deg F / 593 Deg C