Exporting to the EU - CE Marking Guide
EMCSI PTY LTD (Regulatory Compliance Mark, CE Mark, CE Marking, EMC, RCM Mark, Electrical Safety Approvals, Australian Standards)
Energy Efficiency, Electrical Safety Testing, Electrical Safety
What is the CE Mark?
CE marking is the European Union’s solution to the problem of technical barriers to trade with and within the EU. The CE mark is surprisingly not a trade mark nor a sign of quality. It is simply the means that manufacturers use to demonstrate that they have met all their obligations under the relevant European laws for their products. These laws are ratified by the European Parliament and written into what are known as EC Directives. These Directives set down the basic safety requirements (or requirements for general well-being) that products placed on the market must satisfy.
No detailed technical requirements are set down in the Directives and the function of standards is separate from what are known as the “essential protection requirements” of the Directives. Standards support the Directives acting as a source for design and development. They also act as the basis by which manufacturers can demonstrate that they have met the essential protection requirements of the relevant Directives.
For the most part placing product on the market in the EU is via “self declaration”. This means that no certifying body is required in the conformity assessment process. Also there is in the main no requirement for accredited testing. In reality most labs have some form of accreditation including in-house labs.
The essential objective of the EU conformity procedures is to enable the EU’s regulators to ensure that the product conforms with the directives with regard to health and safety of users and consumers.
As a general rule, a product should be subject to the checks in the design process and if positive placed on the market.
One of the most common conformity assessment procedures is summarized as follows:
Step 1: Determine which Directives apply
Step 2: Determine what conformity processes apply
Step 3: Determine what technical assessments apply. This step is derived for the Directives and the applicable standards.
Step 4: Prepare the technical reports and technical file. No requirement to use a Notified Body. Self assessment is perfectly acceptable as is in house testing.
Step 5: Sign a Declaration of Conformity/Incorporation
Step 6: Mark the product with the CE mark and place it on the market in the EU.
Step 7:The Declaration of Conformity/Incorporation and technical file are made available to the relevant EU authorities on their demand, usually during an audit. These documents may be held by the importer or manufacturer as Authorized Representative or an agent appointed by the importer or manufacturer. The technical file may be held outside of the EU.
Excellent information on the EU CE Mark conformity procedures can be found via the following link and links as set out in the table below:
The first covers many of the industry sectors covered by CE marking:
, Ce Certificate
, Ce Logo
, Ce Marking
, Ce Testing
, Electrical Safety
, Electrical Safety Testing
, Electronic Testing & Compliance
, Emc Directive
, Emc Testing
, Energy Efficiency
, Low Voltage Directive
, Machine Safety
, Machinery Safety
, Medical Directive
, Product Safety