Water Based Polyurethane Primer

Water Based Polyurethane Primer from PYK Online Pty Ltd

By: PYK Online Pty Ltd  14-Feb-2013
Keywords: Concrete Products, Waterproofing Contractors, Protective Coatings

FORTIS PRIME520 is a two component, clear, gloss, water based polyurethane primer build coat suitable for brush or roller application. For use as a high performance clear polyurethane primer and build coat for wood and concrete substrates. Usually finished with FORTIS COAT 526 2K Topcoat Gloss, Satin or Matt. USES: Priming concrete, ceramics, glass and timber. COLOUR: Clear PACK SIZE: 5L kit FEATURES: Medium build 2 pack water based Non-Yellowing. Low Odour Chemically bonds to siliceous and most polar compounds. Cures well in humid and cold conditions. SURFACE PREPARATION: For new wood and fully sanded old timber surfaces, final sand with 220 grit sandpaper. For concrete surfaces, best results are obtained from diamond-grinding followed by etching with Fortis CCA Acid based cleaner to remove the grinding debris and to lower the concrete pH. After the CCA cleaner has dried, prime the surface with Fortis Polyurethane Adhesion Promoter. Allow 2-4 hours for Promoter to fully react, then apply the Fortis PRIME520. Apply 1 - 2 coats of FORTIS PRIME520, followed by 1 or 2 coats of FORTIS COAT526 Gloss, Satin or Matt depending on performance required. APPLICATION: Use a Squirrel Mixer® (1 gallon size) with a variable speed drill, according to the manufacturers recommendations. Add the hardener slowly and evenly into the mixing vortex in the resin component, while maintaining a constant mixing speed throughout the addition. Avoid entraining air. Continue mixing for a minimum of three minutes. Proper mixing of the viscous hardener into the low viscosity resin component is essential to achieve proper coating properties. Filter before use. Mixed product has a pot life of 2 hours at 25oC. TECHNICAL DATA: 2 component: Thoroughly mix in ratio 4.1:1 by weight or volume Pot Life: 2hrs Coverage Rate: 10-12m²/L at 60 microns Dry to Sand: Overnight Dry to Recoat: 4-6hrs Recoat Time: within 1 day Shelf Life: One year in closed container. Clean Up: Water.

Keywords: Concrete Coating, Concrete Coatings, Concrete Paint, Concrete Products, Floor Coatings, Floor Treatment Compounds, Floor Treatments, Industrial Flooring, Protective Coatings, Water-Based Coatings, Waterproofing Contractors

Other products and services from PYK Online Pty Ltd

Bostik Seal n Flex 1 Polyurethane Sealant from PYK Online Pty Ltd thumbnail

Bostik Seal n Flex 1 Polyurethane Sealant

Buy Bostik Seal n Flex 1 polyurethane sealant online and save your time and money. We deliver to you

KBS Workgear Black Lightning Nitrile Glove from PYK Online Pty Ltd thumbnail

KBS Workgear Black Lightning Nitrile Glove

Black Lightning nitrile gloves are the worlds toughest disposable glove providing superior protection and durability.


Epoxy Primer - PRIME820

FORTIS PRIME820 is a two - component epoxy primer formulated to achieve maximum adhesion to porous, mineral and polymer substrates and exhibits both organic and inorganic reactivity, allowing the epoxy to chemically react with inorganic substrates, giving enhanced adhesion characteristics

Universal Epoxy Adhesive from PYK Online Pty Ltd thumbnail

Universal Epoxy Adhesive

FORTIS AD822 Universal Epoxy Adhesive is a two component epoxy adhesive to provide enhanced adhesion to wood, glass reinforcing and other laminates.

PVA D3 Water Resistant from PYK Online Pty Ltd thumbnail

PVA D3 Water Resistant

FORTIS AD317 is a high moisture resistance (DIN EN204/D3) PVA with high bond strength & heat resistance where resistance to high humidity is required according to EN204/D3

Premium Concrete Coating from PYK Online Pty Ltd thumbnail

Premium Concrete Coating

Premium Concrete Coating is a high performance Non Yellowing Polyurethane clear coating that can be used for any application requiring low maintenance, heavy duty, stain resistance on concrete surfaces. Suitable for build and top coat use.


Waterbased Non Yellowing Polyurethane Coating

FORTIS COAT526 is a two component, medium solids, clear, water based polyurethane coating for marine, timber & concrete - brush or roller application.