Automated parts cleaning increases outputs and precision

Automated parts cleaning increases outputs and precision from Dimac Tooling Pty Ltd

By: Dimac Tooling Pty Ltd  21-Oct-2011
Keywords: Machining, Machine Tool Accessories

Any time a part is machined, the oil, grease and chips from the machining process need to be removed before further part production takes place. Otherwise, residue and chips inhibit later manufacturing processes, whether they are performed in-house or at an outside manufacturer.

As many manufacturers can attest it can be a challenge to clean machined parts to tight specifications in a cost-effective and environmentally sensitive manner. Manual parts cleaning is not only cost- and labour-intensive, it also poses a risk for the operator’s health. With the EMC Jetsink Cleaning Station, Dimac Tooling now offers an automatic alternative to manual solvent wash tanks.

Engineered to automatically clean oily or dirty parts without hand scrubbing or toxic solvents, the Jetsink cleans parts using only soap and water in a matter of seconds, thus freeing workers for more productive tasks. The small footprint, only 711mm x 560mm deep, makes it ideal for cell manufacturing and for applications where space is limited.

With a large wash capacity  of up to 660mm x 356mm x 381mm (L x W x H), the Jetsink utilises dual 360° spray manifolds with 80 precision positioned jets to clean with just 95 litres of ordinary water and detergent. The solution is heated with a 1650W, 110V heater (13.5kW, 220V heater optional) and then jet sprayed by a recirculating pump. No venting or special utility connections are needed. Only an electrical hookup is required.

Standard features include a fully insulated wash cabinet, an 80 jet spray manifold with easy cleanout port, parts centering wash rack, a wash cycle timer (up to 30 minutes), a panel-mounted adjustable thermostat, a full ported 1" ball valve drain, and a lid safety interlock switch.

For small items and screw machine parts, an optional Rotary Cleaning System is available. The rotary cleaning system gently tumbles your parts in a self contained basket while they are being sprayed. When the wash cycle is completed, the rotor continues turning, thereby dewatering and drying the part.

Other options include a dip tank basket for soaking hard to clean or heavily soiled components, a side mounted workstation, and some nylon coated accessories for protecting fragile parts. Additional information on options and price schedules can be found on the links located to the left.

For more info please visit

Keywords: Machine Tool Accessories, Machining

Contact Dimac Tooling Pty Ltd


Print this page

Other news and updates from Dimac Tooling Pty Ltd

Dimac Tooling: Caring for your environment at Austech 2011 from Dimac Tooling Pty Ltd thumbnail

Dimac Tooling: Caring for your environment at Austech 2011

Many enthusiastic visitors experienced Dimac Tooling’s vast range of products firsthand from 24 to 27 April 2011 at Austech in Melbourne, while the grass-covered environment section of the impressive stand attracted the bulk of visitors.