Australian EMC labelling requirements for C Tick & A Tick

By: C Tick, CE, EMC Compliance Services  02-Feb-2011
Keywords: Compliance Testing, Compliance Services, Test and Measurement


The Australian Communications and Media Authority (ACMA) is responsible for regulating the mandatory requirements for labelling of Electrical and electronic equipment; Radiocommunications devices & Telecommunications devices (and cabling) in Australia.

A supplier is required to comply with all applicable mandatory standards before compliance labelling their device, and must also hold a compliance folder, which must be made available for the ACMA to view on request.

Suppliers of electronic & electrical products to Australia must affix a compliance label. The label indicates compliance with an applicable EMC standard and provides the ACMA with a traceable link between the product and supplier.

The label is comprised of a C-Tick logo and the supplier’s identification (most commonly the supplier number issued by the ACMA).

Example of a C-Tick label:

The accepted methods for supplier identification on C-Tick compliant equipment are:

  • Supplier number issued by the ACMA;
  • Business name and address in Australia;
  • Business name registered on the national business register;
  • Personal name and address in Australia of the place of business;
  • Australian company number (ACN);
  • Australian registered body number (ARBN);
  • Australian business number (ABN); or
  • Australian registered trademark.

The following requirements apply to the label affixed to the device:

The A-Tick label is used to show compliance of customer equipment to the ACMA telecommunications regulatory requirements. If both the telecommunications and the radiocommunications regulatory requirements are applicable to your product, the A-Tick mark will indicate compliance with both.

The compliance record must contain all the relevant information described under the regulatory arrangements.

Example of an A-Tick label:

In addition to the C-Tick labelling requirements, if the A-Tick compliance label is placed on the external surface of the packaging, the label must be clearly visible and take up an area that is greater than one per cent (1%) of that external surface.

The Regulatory Compliance Mark (RCM) is a trademark owned by Australian and New Zealand regulators. The RCM may be used as an alternative mark to the C-Tick, but is not an alternative to the A-Tick. The RCM alone cannot be used as a compliance mark for telecommunications devices, but may be used in conjunction with the A-Tick mark if desired.

Example of an RCM label:

If the RCM is used as an alternative to the C-Tick, the device must comply with all other applicable regulations, such as electrical safety, that are covered by the RCM standard AS/NZS 4417. There are various parts of this standard that specify the conditions for use of the RCM.

Suppliers who intend to use the RCM must register with Standards Australia. They must also notify the ACMA of their intention to use this trademark. The notification forms are available in the standard AS/NZS 4417.

For more information contact :

Compliance Engineering Pty Ltd
Unit 1, 70 Rushdale Street
Knoxfield VIC 3180 Australia
Phone: +(613) 9763 3079
Fax: +(613) 9763 9706
email: [email protected]

Keywords: Ce Compliance Testing, Compliance Services, Compliance Testing, C-Tick, C-Tick Approval, C-Tick Certification, C-Tick Testing, Electromagnetic Compatibility, Electromagnetic Compatibility Emc, Electronic Testing & Compliance, Emc Compliance, Emc Compliance Testing, Emc Services, Emc Testing, Emr Hazard Measurments, Product Compliance Services, Products Compliance, Rf Measurements, Telecommunications Testing, Test and Measurement,

Contact C Tick, CE, EMC Compliance Services


Print this page

Other products and services from C Tick, CE, EMC Compliance Services

C-Tick requirements for equipment or vehicle with petrol engines from C Tick, CE, EMC Compliance Services thumbnail

C-Tick requirements for equipment or vehicle with petrol engines

Compliance Engineering can achieve compliance goals efficiently, enabling new products to be brought to market without costly delays.

EMC testing of vehicle components from C Tick, CE, EMC Compliance Services thumbnail

EMC testing of vehicle components

Compliance Engineering Pty Ltd EMC testing facilities now cater for the EMC testing requirements of OEM and after market vehicle component manufacturers.

CE Compliance for Europe from C Tick, CE, EMC Compliance Services thumbnail

CE Compliance for Europe

As of 1st January 1997 all electronic devices bound for the European market are required to be labeled with a CE mark. The CE mark requirements are different to the Australian C-Tick and are far more extensive in terms of compliance testing requirements. This article describes the process and record keeping requirements for CE compliance.

C-Tick and Supplier Obligations from C Tick, CE, EMC Compliance Services thumbnail

C-Tick and Supplier Obligations

The majority of industry in Australia is now aware of the mandatory EMC compliance requirements, which apply to electronic/electrical products supplied to the Australian market. However, there are still organisations that are not aware, and many more who are aware, but do not fully understand the process.