Lifting sling inspection

Lifting sling inspection from AusStandard Bed and Lifter Testing

By: AusStandard Bed and Lifter Testing  10-Feb-2016
Keywords: Sling Inspection, Lifting Sling Testing,

We inspect lifting slings as per Worksafe (Vic) requirements and where possible date stamp the sling

Keywords: Lifting Sling Testing, Sling Inspection,

Contact AusStandard Bed and Lifter Testing


Print this page

Other products and services from AusStandard Bed and Lifter Testing


Test and Tag + RCD Testing

AusStandard can test and tag all plug in appliances, extension leads and powerboards. We can also test all powerpoints connected to RCDs to prove they are working correctly. We provide a spreadsheet with all results form our tester.


Hoist repairs

AusStandard BLT can service and test most makes and models of patient lifters and hoists. Like all commercial lifting equipment, these must be tested to 100% of their Safe Working Load (SWL) annually We test all emergency operation mechanisms, switches and cords. We remove and inspect the main pivot pins or bolts to lubricate before refitting or replacing. We operate all functions and complete any minor repairs. We visually inspect wheels and operationally test brake.


Biomedical Testing

Tympanic thermometers are tested with a calibrated test source for accuracy after lens cleaning. Sphygmomanometers (blood pressure cuffs) are tested against a calibrated manometer for accuracy and leakage rates. Portable, wall mounted and electronic Sphygmos should all be tested against a calibrated source annually.


Patient Bed Testing

AusStandard Bed and Lifter Testing undertake testing and maintenance on most makes of hospital and nursing home beds. We carry out electrical testing to AS3551 and mechanical check each bed through all its' operations. We come to your facility and work with your staff to test your equipment while minimising your client disruption.


Patient Lifter Service

Patient and resident lifting equipment service and testing