Hydraulic Flushing Unit

Hydraulic Flushing Unit from Fluidtech

By: Fluidtech  03-Jul-2013
Keywords: Oil Cleaning, Oil Flushing, Flush Pipes

• With FluidTech’s unique modular build configuration the flushing unit is capable of 220lpm flushing unit “Self contained” • Add on tank will allow up 1400 litres of volume, the flushing tank is equipped with heating elements and a heat exchanger to maintain a constant flushing tamp • Add on high flow/high velocity piston motor/ triple gear pump transfer station allowing an achievable 1320 lpm • This high flow flushing unit will allow FluidTech to flush your pipes at the required Reynolds number • Nr = (3160 x GPM “US”) / (CS X D “inches”) = Reynolds #, general rule of thumb is this Reynolds number should be above 4000Nr • Case study #1: Below is an actual job FluidTech was contracted to complete as capability do so was limited with other suppliers. 8” pipe for a turbine bearing oil line requires flushing, oil to be used has a viscosity of [email protected] D Celsius, required Reynolds number of 4000 minimum Nr = (3160 x 202.53GPM or “766.66lpm”) / (20CS “32 @ 40Degrees Celsius becomes 20CS @ 52 Degrees Celsius” X 8” “Diameter in inches”) = 4000Nr “Reynolds number” • At the above case study FluidTech’s Unique Flushing rig is only running at 58.08% of full potential. • FluidTech actually flushed this pipe at 850lpm to ensure for the whole duration we were well above the customers minimum Reynolds number and flushed at a constant 60Degrees Celsius. Actual Reynolds number achieved = 5911.83Nr • All results are electronically data logged for your convenience & peace of mind, the following parameters it what will be electronically logged o Flow o Pressure o Temperature o Contamination • FluidTech’s Flushing rig is diesel powered so therefore eliminating the need for a three phase power supply and thus allowing FluidTech to flush anywhere anytime • The flushing rig has an estimated asset value of $250K + Skill with the technician supplied so you the customer can be reset assuerd your job will done to your specific requirements with the most economical outcome possible •

Keywords: Cleaning Industrial Pipes, Flush Pipes, Oil Cleaning, Oil Flushing, Solar Generaters, Turbine Flushing,

Other products and services from Fluidtech

Hydraulic Pumps from Fluidtech thumbnail

Hydraulic Pumps

FluidTech is dedicated to providing quality products at competitive prices with an unmatched high level of customer service -- constantly striving to supply what our customer asks for and continually reviewing what is available in the market and what can be improved upon.