Ultrahawke Pty Ltd
Weighbridges, Weighbridge Loadcells, Driver Control Stations
Two load cell weighbridges were recently commissioned for Gunn’s Timber Products plant in Portland, Victoria for weighing truckloads of timber. The two weighbridges were manufactured by Ultrahawke in Melbourne and installed side by side to allow simultaneous truck entry and departure.Each weighbridge measures 30 metres long by 3.5 metres wide and is fitted with 8 Flintec weighbridge load cells for a weighing capacity of 80t. The longer than standard weighbridges were required for receiving timber logs bought in by long logging trailers and for semi-trailers and B-Doubles carting wood chips from the plant.A Driver Control Station (DCS) is fitted in a small weighbridge hut mounted between the load cell weighbridges for drivers to enter load details using the colour touch screen interface. Dallas card readers are used to collect truck/owner ID details to minimise the amount of data entry required by the drivers. The data entered into the DCS is forwarded to the client’s SAP system via a network connection. The DCS also controls traffic lights and positional sensors which are fitted to each weighbridge to ensure the correct weighbridge weighing sequences are followed.Ultrahawke is Australia’s largest manufacturer of weighbridges and has the ability to supply weighbridges using either analogue weighbridge load cells or fully digital weighbridge load cells.
Print this page
Australian made Modular Weighbridges are available from Ultrahawke in Campbellfield, Melbourne.
Four Ultrahawke weighbridges fitted with digital load cells are now operating at a water treatment plant operated by Melbourne Water.
A public weighbridge is being used for weighing cattle trucks entering and leaving the Bective Station near Tamworth. The weighbridge
A concrete deck weighbridge was recently commissioned at Transwaste’s Dandenong waste treatment and recovery facility for weighing trucks of waste
Weighbridge software provided by Ultrahawke is being used by Abigroup for recording the volumes of road base despatched to the
Axle scales were recently installed into a special “lead lined” pit at Smorgon Steel’s Laverton Site in Victoria. The pit
Cattle Scales were recently installed for the Elders Rural Powrana saleyards in Tasmania by Alan Bennett Scale Service. The Cattle
Ultrahawke’s Truck weighing scales were recently commissioned for Hancock Farm Company at Welcome Creek near Bundaberg in Queensland.
Truck scales manufactured by Ultrahawke
Ultrahawke recently completed the installation of an 18 metre weighbridge for Melbourne based Kilsyth Parts Recovery.
Ultrahawke recently completed the commissioning of a weighbridge to be used for weighing truckloads of aggregates sold to clients.
Axle scales were recently installed into a special “lead lined” axle scales pit to overcome potential electrical interference being generated by a 22kVA cable buried approximately 1500mm below the axle scales foundations.
New England Weighing Services (NEWS) installed and commissioned a second Ultrahawke weighbridge for Werris Creek Coal at Gunnedah in NSW.
2/9 Production DriveAustralia
Campbellfield, VIC, 3061,Australia
Main: (03) 9357 7470Fax: (03) 0935 7450
Create your free Hotfrog business profile
Follow Hotfrog on:
Hotfrog Small Business Hub