CASE STUDY : K-Redi-Liner Ceramic - Wagga Wagga, NSW

CASE STUDY : K-Redi-Liner Ceramic - Wagga Wagga, NSW from Kinder Australia Pty Ltd

By: Kinder Australia Pty Ltd  13-Jun-2013
Keywords: Material Handling Equipment, Conveyors, Conveyor

Product category : Flow & Anti Wear
Location : Wagga Wagga, New South Wales
Conveyed material : 30mm crushed river rock
Previous wear liner : CC 1500 Chromium Carbide
Previous wear liner life : 6 months
Kinder & Co wear liner installed : K-Redi-Liner Ceramic G83A
Current wear liner life : 2 1⁄2 years
Current wear : 30%
Installation date : January 2011
Last inspection date : May 2013

Previous Problem
Founded in 1947, our customer is a long established local company, supplying a wide range of high quality premixed concrete and quarry products to the building and construction industry in Wagga Wagga and surrounding areas.

“Previously we had used hardened steel plating to line this impact area at the start of the screen load zone. We used steel because it has always been considered the toughest and best material to cope with the high abrasion levels caused by the high volume of rocks.

We would routinely need to change the steel plating on average every 6 months, shutting down the entire belt operation so that our maintenance crew could weld on a new plate.”

Resolution
“When the Kinder & Co sales engineers suggested that we try the K-Redi-Liner lining panels I was quite doubtful that they would be able to replace the steel plate.

However straightaway I was impressed by how easy they were to bolt on – much quicker and needing less manpower than the steel plate. And the individual panels are very effective because they can be placed only in areas of high-wear with no modifications required.

It’s coming up to 2 and half years now since we first installed the K-Redi-Liners and I couldn’t be more delighted in how they have performed. Less stoppages means our productivity output rates have increased so we can meet customer demand quicker.”

Keywords: Abrasive Wear Lining, Belt Conveyor Systems, Bulk Handling, Bulk Materials Handling, Ceramic Wear Liners, Conveyor, Conveyor Accessories, Conveyor Belt Supplies, Conveyor Components, Conveyor Hardware, Conveyor Suppliers, Conveyors, Material Handling Equipment, Rubber Wear Liners,

Contact Kinder Australia Pty Ltd

Email

Print this page

Other examples of best work from Kinder Australia Pty Ltd

CASE STUDY:  K-Sure® Belt Support System from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Sure® Belt Support System

Once the belt was supported adequately, conveyor skirting can function along a flat, sag-free belt line. The K-Containment Seal is a high performance skirt system that offers exceptional resistance to wear. The slotted system arrangement extends its service life by allowing for further ongoing adjustment after initial installation. Since installation in July 2014 Ohau Quarry has had no issues with belt sag or belt damage and the same belt is still in operation coming up to 2 years later.


CASE STUDY:  K-Containment Seal and K-Snap-Loc from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Containment Seal and K-Snap-Loc

“Since the installation on the 18th Jan, the site has not had to re visit or clean the area up. So in just 6 weeks already the company has saved more than $12K. The tower is still looking clean and doesn’t look to need any attention for some time.”


CASE STUDY:  K-Magna-Patch – Reusable Wear Repair Magnetic Patch from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Magna-Patch – Reusable Wear Repair Magnetic Patch

Because we didn’t need to allocate any additional emergency resources to this urgent repair task, which can cost approximately $1000 a day, this problem was resolved very cost-effectively as well as quickly.”


27-Apr-2016

CASE STUDY: K-Sure® Belt Support System

Kinder Australia then recommended the installation of the double layered K-Skirting Seal to trap the dust particles effectively. Mounted using shallow clamps it is ideal for this confined access location. This skirt works by utilising an interior wear resistant layer of polyurethane (longer lasting than rubber skirting), but it also has an outer anti-dust integral moulding that can adapt to belt vibration and maintain the correct pressure to effectively seal the belt.


CASE STUDY:  K-Containment Seal from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Containment Seal

K-Sure Belt Support, with its fixed low friction slider bars instead of moving rollers, was also installed directly under the transfer point, using adjustable frames to ensure exact angles. This is the ideal combination of seal and belt support and our customer is highly delighted with the sustainable outcome of this productivity improvement.


CASE STUDY:  K-Superline® Polyurethane Lining Sheet from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Superline® Polyurethane Lining Sheet

K-Superline has now completely eliminated material build up inside the feeder chute, and so has stopped the need for any jack-hammering on site. Our customer also observed that the K-Superline® provides 50% more wear life and so is completely delighted with their investment in a correctly specified durometer of K-Superline® high performance polyurethane sheet lining. Overall, our customer is seeing major cost gains from switching to K-Superline®.


CASE STUDY:  K-Skirting Seal from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Skirting Seal

Our customer confirmed that the change over and installation was not complicated and took the anticipated 2 resources to install as part of a planned maintenance schedule. K-Skirting Seal has not disappointed and lasts approximately 12 months in regular production and suppresses the dust more effectively.


CASE STUDY:  K-Superline ® Polyurethane Lining Sheet from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Superline ® Polyurethane Lining Sheet

K- Superline® has now been installed at the Dandenong site for 5 months and is showing no signs of wear. K-Superline® has exceeded our customer’s expectations of its durability potential.


CASE STUDY: Tru-Trac Conveyor Belt Tracking System – Yallourn, Victoria from Kinder Australia Pty Ltd thumbnail
19-Mar-2015

CASE STUDY: Tru-Trac Conveyor Belt Tracking System – Yallourn, Victoria

The Yallourn Power Station commenced operations in 1974 with four generating units commissioned between 1974 and 1982. Every hour 2,400 tonnes of brown coal is used to boil water into superheated steam to drive four turbine generators.


CASE STUDY : K-Sure® Belt Support System – Tauranga, New Zealand from Kinder Australia Pty Ltd thumbnail
19-Mar-2015

CASE STUDY : K-Sure® Belt Support System – Tauranga, New Zealand

This New Zealand based customer’s core business is based around their quarry activities. They are a major supplier of quarried products to the construction industry, with raw materials extracted and processed from over 40 different sites around the country.


CASE STUDY: K-Redi-Liner KP Dual Duro, Dromana from Kinder Australia Pty Ltd thumbnail
01-Sep-2014

CASE STUDY: K-Redi-Liner KP Dual Duro, Dromana

To resolve this problem, our customer favoured the features of K-Redi-Liner because it was lightweight in comparison to the bisalloy patches and also only needed to be bolted into place and not welded. Overall it required less labour to install which was meant that replacement costs were reduced.


CASE STUDY: K-Superline Polyurethane Lining Sheet - Brooklyn, Victoria from Kinder Australia Pty Ltd thumbnail
22-Jul-2014

CASE STUDY: K-Superline Polyurethane Lining Sheet - Brooklyn, Victoria

K- Superline® has now been installed at the Brooklyn site now for over 18 months and our customer is delighted to report that no signs of wear or tears from the aggregate have been observed


TEST REPORT: K-Superskirt Engineered Polyurethane from Kinder Australia Pty Ltd thumbnail
22-Jul-2014

TEST REPORT: K-Superskirt Engineered Polyurethane

Based on the results of the “Taber Test” by Excel Plas, the test conclusions confirmed that the Kinder & Co K-Superskirt® (red) polyurethane abrades less by comparison to the competitors (blue) polyurethane. The final result is further evidenced when tested at 50,000 cycles, wear index results showing 5.8 (red) compared to 25.92 (blue) or a ratio of 4.47: 1.


CASE STUDY: K-Snap-Loc Dust Seal System - North-West, Western Australia from Kinder Australia Pty Ltd thumbnail
22-Jul-2014

CASE STUDY: K-Snap-Loc Dust Seal System - North-West, Western Australia

Our customer has confirmed that the K-Snap-Loc Dust Seal System was very easy to install “only required measuring, and some welding of the stainless unistrut and did not require knocking down of skirts and adjustment. Kinder & Co provided lots of assistance in getting quotes, drawings, supplying offcuts of material from the warehouse and working with us to get our requirements right (stainless steel unistrut instead of the standard mild steel in stock).”


CASE STUDY: K-Impact Belt Support System - Geraldton, Western Australia from Kinder Australia Pty Ltd thumbnail
26-Feb-2014

CASE STUDY: K-Impact Belt Support System - Geraldton, Western Australia

Our ISO 9001 certified design and development process meant that the specification and manufacturing phase of this idea went smoothly and without error. Our customer is delighted with the final outcome.