CASE STUDY: K-Impact Belt Support System - Geraldton, Western Australia

CASE STUDY: K-Impact Belt Support System - Geraldton, Western Australia from Kinder Australia Pty Ltd

By: Kinder Australia Pty Ltd  26-Feb-2014
Keywords: Material Handling Equipment, Conveyors, Conveyor

Product category : Belt Support

Location : Geraldton, Western Australia

Conveyed material : Iron Ore

Installation date : February 2014

Previous problem:

Our customer manages the bulk handling for a range of materials including iron ores, grains, fuels, metals, mineral sands, talc, garnet and fertilisers.

Trade growth has seen their output move from a five million tonne per annum facility five years ago to comfortably reach 10 million tonnes in 2013, with further projections that the facility will handle up to fifteen million tonnes by the end of 2014.

Our customer was experiencing 2 key problems; the primary problem was potential mechanical failure due to excessive load. The second problem was to reduce material spillage.

At the key loading zone area, the original trough support frames were beginning to fatigue, in part accelerated due to the increased output, but also the trough frames were not suitable for the types of heavy loads that our customer manages.

The existing trough supports required an increasing amount of maintenance and they were creating significant levels of spillage that had to be cleared manually on a daily basis.

Resolution:

After research and then consultation with our Sales Engineer, our customer decided to install the K-Impact Belt Support System to meet the needs of the Facility’s heavy duty and increased material handling projections. They used this opportunity to request some modifications.

The customer’s first modification idea was the creation of quick release pins for ease of installation and ongoing maintenance. The second modification was a joint idea between customer and Kinder & Co. This was the addition of holes in the side supports to enable a chain or sling to help retract the side for ongoing maintenance.

Our ISO 9001 certified design and development process meant that the specification and manufacturing phase of this idea went smoothly and without error. Our customer is delighted with the final outcome.

If you have a specific product enquiry, please contact one of our sales engineers on 03 9587 9244 or visit www.kinder.com.au for more details.

Keywords: Belt Conveyor Systems, Bulk Handling, Bulk Materials Handling, Conveyor, Conveyor Accessories, Conveyor Belt Supplies, Conveyor Components, Conveyor Hardware, Conveyor Suppliers, Conveyors, Impact Cradles, Material Handling Equipment, Replacement Impact Bars,

Contact Kinder Australia Pty Ltd

Email

Print this page

Other examples of best work from Kinder Australia Pty Ltd

CASE STUDY:  K-Sure® Belt Support System from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Sure® Belt Support System

Once the belt was supported adequately, conveyor skirting can function along a flat, sag-free belt line. The K-Containment Seal is a high performance skirt system that offers exceptional resistance to wear. The slotted system arrangement extends its service life by allowing for further ongoing adjustment after initial installation. Since installation in July 2014 Ohau Quarry has had no issues with belt sag or belt damage and the same belt is still in operation coming up to 2 years later.


CASE STUDY:  K-Containment Seal and K-Snap-Loc from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Containment Seal and K-Snap-Loc

“Since the installation on the 18th Jan, the site has not had to re visit or clean the area up. So in just 6 weeks already the company has saved more than $12K. The tower is still looking clean and doesn’t look to need any attention for some time.”


CASE STUDY:  K-Magna-Patch – Reusable Wear Repair Magnetic Patch from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Magna-Patch – Reusable Wear Repair Magnetic Patch

Because we didn’t need to allocate any additional emergency resources to this urgent repair task, which can cost approximately $1000 a day, this problem was resolved very cost-effectively as well as quickly.”


27-Apr-2016

CASE STUDY: K-Sure® Belt Support System

Kinder Australia then recommended the installation of the double layered K-Skirting Seal to trap the dust particles effectively. Mounted using shallow clamps it is ideal for this confined access location. This skirt works by utilising an interior wear resistant layer of polyurethane (longer lasting than rubber skirting), but it also has an outer anti-dust integral moulding that can adapt to belt vibration and maintain the correct pressure to effectively seal the belt.


CASE STUDY:  K-Containment Seal from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Containment Seal

K-Sure Belt Support, with its fixed low friction slider bars instead of moving rollers, was also installed directly under the transfer point, using adjustable frames to ensure exact angles. This is the ideal combination of seal and belt support and our customer is highly delighted with the sustainable outcome of this productivity improvement.


CASE STUDY:  K-Superline® Polyurethane Lining Sheet from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Superline® Polyurethane Lining Sheet

K-Superline has now completely eliminated material build up inside the feeder chute, and so has stopped the need for any jack-hammering on site. Our customer also observed that the K-Superline® provides 50% more wear life and so is completely delighted with their investment in a correctly specified durometer of K-Superline® high performance polyurethane sheet lining. Overall, our customer is seeing major cost gains from switching to K-Superline®.


CASE STUDY:  K-Skirting Seal from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Skirting Seal

Our customer confirmed that the change over and installation was not complicated and took the anticipated 2 resources to install as part of a planned maintenance schedule. K-Skirting Seal has not disappointed and lasts approximately 12 months in regular production and suppresses the dust more effectively.


CASE STUDY:  K-Superline ® Polyurethane Lining Sheet from Kinder Australia Pty Ltd thumbnail
27-Apr-2016

CASE STUDY: K-Superline ® Polyurethane Lining Sheet

K- Superline® has now been installed at the Dandenong site for 5 months and is showing no signs of wear. K-Superline® has exceeded our customer’s expectations of its durability potential.


CASE STUDY: Tru-Trac Conveyor Belt Tracking System – Yallourn, Victoria from Kinder Australia Pty Ltd thumbnail
19-Mar-2015

CASE STUDY: Tru-Trac Conveyor Belt Tracking System – Yallourn, Victoria

The Yallourn Power Station commenced operations in 1974 with four generating units commissioned between 1974 and 1982. Every hour 2,400 tonnes of brown coal is used to boil water into superheated steam to drive four turbine generators.


CASE STUDY : K-Sure® Belt Support System – Tauranga, New Zealand from Kinder Australia Pty Ltd thumbnail
19-Mar-2015

CASE STUDY : K-Sure® Belt Support System – Tauranga, New Zealand

This New Zealand based customer’s core business is based around their quarry activities. They are a major supplier of quarried products to the construction industry, with raw materials extracted and processed from over 40 different sites around the country.


CASE STUDY: K-Redi-Liner KP Dual Duro, Dromana from Kinder Australia Pty Ltd thumbnail
01-Sep-2014

CASE STUDY: K-Redi-Liner KP Dual Duro, Dromana

To resolve this problem, our customer favoured the features of K-Redi-Liner because it was lightweight in comparison to the bisalloy patches and also only needed to be bolted into place and not welded. Overall it required less labour to install which was meant that replacement costs were reduced.


CASE STUDY: K-Superline Polyurethane Lining Sheet - Brooklyn, Victoria from Kinder Australia Pty Ltd thumbnail
22-Jul-2014

CASE STUDY: K-Superline Polyurethane Lining Sheet - Brooklyn, Victoria

K- Superline® has now been installed at the Brooklyn site now for over 18 months and our customer is delighted to report that no signs of wear or tears from the aggregate have been observed


TEST REPORT: K-Superskirt Engineered Polyurethane from Kinder Australia Pty Ltd thumbnail
22-Jul-2014

TEST REPORT: K-Superskirt Engineered Polyurethane

Based on the results of the “Taber Test” by Excel Plas, the test conclusions confirmed that the Kinder & Co K-Superskirt® (red) polyurethane abrades less by comparison to the competitors (blue) polyurethane. The final result is further evidenced when tested at 50,000 cycles, wear index results showing 5.8 (red) compared to 25.92 (blue) or a ratio of 4.47: 1.


CASE STUDY: K-Snap-Loc Dust Seal System - North-West, Western Australia from Kinder Australia Pty Ltd thumbnail
22-Jul-2014

CASE STUDY: K-Snap-Loc Dust Seal System - North-West, Western Australia

Our customer has confirmed that the K-Snap-Loc Dust Seal System was very easy to install “only required measuring, and some welding of the stainless unistrut and did not require knocking down of skirts and adjustment. Kinder & Co provided lots of assistance in getting quotes, drawings, supplying offcuts of material from the warehouse and working with us to get our requirements right (stainless steel unistrut instead of the standard mild steel in stock).”