Inspections from All Thermal Inspection Services

By: All Thermal Inspection Services  08-Nov-2013
Keywords: Inspections, Electrical, Preventative Maintenance

Infrared scanning is used by many industries to trouble shoot for potential problems and maintenance needs. For Example: It is used to determine leaks in roofing systems that have resulted in saturated insulation. The wet insulation collects heat during sunny days and holds it during cooler evenings. A scan helps pinpoint the wetted insulation without removing the covering over insulation that does not need to be replaced. It can be used to spot bearings that are overheating. This is useful on paper machines, conveyor systems and other machines where Lubricating systems sometimes fail. It is used to monitor the performance of steam traps. Both the pipe and trap are scanned. A high inlet temperature combined with a low outlet temperature means that trap is performing, as it should. This is quicker and safer than a manual test. Thermal imaging is also ideally suited for analyzing heat losses in existing industrial structures. It can be used to identify energy waste and to monitor corrective actions

Keywords: Electrical, Heat, Hot Spots, Infrared, Inspections, Preventative Maintenance, Switchboards, Thermal Inspection, Thermal Survey,

Contact All Thermal Inspection Services


Print this page

Other products and services from All Thermal Inspection Services

Thermal Inspections from All Thermal Inspection Services thumbnail

Thermal Inspections

All Thermal Inspection Services covers a large range of Non Destructive Testing using a Infra-Red camera - Building Inspections, Pest - Detect Termite activity, Electrical - Find Hot Spots & overloads in switchboards, Find a Water Leak in the Wall or Ceiling, Energy Efficiency - Missing Insulation, Heat or cooling losses, Building /Pre-Purchase Inspections, Condition Monitoring (motors, bearings etc.), Equine / Veterinary Diagnosis,Refrigeration Air leaks in Door Seals .......And more…………