Mobile Bulk Bag Filling System with Metal Detection, Tilt-Down Feeder
Flexicon Corporation (Australia) P/L
Bulk Bag Filler, Fibc Filler, Bulk Bag Filler Feeder System
A mobile Bulk Bag Filling System from Flexicon features an integral metal detector/separator and a tilt-down conveyor/feeder for dust-free filling at multiple locations.
Integral to the system is a patented TWIN-CENTREPOST™ Bulk Bag Filler to maximise strength and improve accessibility to bag hooks while simplifying construction and reducing cost.
The system detects metal in the free-fall stream of material entering the filler and then ejects it through a chute that discharges into a removable drum at the rear of the unit.
The filler is also equipped with: fill head height adjustment to accommodate all popular bag sizes; inflatable cuff to seal the bag inlet spout; blower to remove bag creases prior to filling; load cells for filling by weight; vent port for dust-free air displacement during filling; pneumatically retractable bag hooks; and automated vibratory densification/deaeration system to maximise capacity and stabilise the bag for storage or shipment.
The first bulk bag filler to receive USDA acceptance, it is constructed of 316 stainless steel, finished to sanitary standards and configured with full-length forklifting tubes allowing it to be moved throughout the plant.
A tilt-down flexible screw conveyor on a castor-mounted frame, which mates with the bulk bag filler's base frame, can be manoeuvered through narrow aisles and around corners. With the hopper, support boom and conveyor assembly tilted down, the unit fits through standard doorways and orients the conveyor tube horizontally, allowing the flexible screw to be removed easily for thorough cleaning and inspection.
The conveyor’s inlet hopper includes an air displacement vent with cartridge filter that is equipped with a reverse pulse cleaning system that dislodges accumulated dust with short bursts of compressed air, returning the dust to the hopper on a timed cycle, maintaining operating efficiency.
Once the operator connects an empty bag and presses "start," weigh-filling functions are automatic. The controller runs the conveyor at high speed, and steps it down to trickle-feed rate immediately prior to stopping it once the accurate fill weight is gained, and releasing the bag straps.
The programmable controls are housed in a stainless steel NEMA 4X enclosure with touch screen that graphically displays filling functions.
The company also manufactures rear post bulk bag fillers and patented fillers that pivot the fill head for floor-level bag connections, as well as bulk bag dischargers, bulk bag conditioners, pneumatic conveying systems, bag dump stations, drum/box/container tippers, weigh batching systems and engineered plant-wide bulk handling systems with automated controls.
For information contact Flexicon Corporation (Australia) PTY Limited, 78 Westgate St., Wacol, QLD 4076, Australia, 1 300 353942, [email protected], http://www.flexicon.com.au.
Bulk Bag Filler
, Bulk Bag Filler Feeder System
, Bulk Bag Filler With Feeder
, Bulk Bag Filler With Flexible Screw Conveyor
, Bulk Bag Filler With Metal Detection
, Bulk Bag Filler With Tilt Down Flexible Screw Conveyor
, Bulk Bag Filling System
, Fibc Filler
, Fibc Filler Feeder System
, Fibc Filler With Feeder
, Fibc Filler With Flexible Screw Conveyor
, Fibc Filler With Metal Detection
, Fibc Filler With Tilt Down Flexible Screw Conveyor
, Fibc Filling System
Contact Flexicon Corporation (Australia) P/L
Print this page