Safe Work at Heights Training

Safe Work at Heights Training from Saferight Pty Ltd QLD

By: Saferight Pty Ltd QLD  07-Jul-2011
Keywords: Registered Training Organisation, Fall Prevention, Fall Arrest

 This course offers a comprehensive introduction to Working Safely at Heights as defined by RIIOHS204A. Starting with a guide to Legislation, Regulations and the Standards governing working at height, the course takes participants through the selection and use of anchor points, harnesses and associated equipment, and the forces generated in falls. Topics such as ground clearance, the pendulum effect and swing back are also covered. For further information see

Keywords: Fall Arrest, Fall Prevention, Fall Protection Systems, Height Safety Training, Height Training, Registered Training Organisation

Contact Saferight Pty Ltd QLD

Email

Print this page

Other products and services from Saferight Pty Ltd QLD

Fall Arrest Harnesses from Saferight Pty Ltd QLD thumbnail
08-Sep-2011

Fall Arrest Harnesses

When you are working at height and are at risk of a fall you need the right protection. The harness you choose can make all the difference. Talk to Saferight and make sure you get the right tool for the job.


08-Sep-2011

Gas Test Atmosphere / Atomospheric Monitoring Training

If you are working in confined spaces or are monitoring potentially hazardous atmospheres, then you need specific training. This training aims to give you the basic skills required to perform atmospheric testing.


08-Sep-2011

Industrial Rope Access Training

If you need to gain access sometimes useing ropes is the only way. This course aims to give you the basic skill set you require to work safely on ropes.


Tower Rescue Training Level 1 from Saferight Pty Ltd QLD thumbnail
08-Sep-2011

Tower Rescue Training Level 1

The ability to conduct a safe rescue is an intergral part of working at height. Without appropriate rescue training and equipment you are not working safely. Call Saferight for more information.


Confined Space Training from Saferight Pty Ltd QLD thumbnail
07-Jul-2011

Confined Space Training

This course is aimed at ensuring the health and safety of personnel who have to undertake work activities within a confined space as defined by AS/NZS 2865:2009. On sucessful completion the following units are issued:  RIIOHS202A- Enter and Work in Confined Spaces MSAPMPER205C- Enter Confined Space MSAPMPER200C- Work in Accordance with an Issued Permit