Hydrosense 11 - Soil Moisture Monitoring Equipment

Hydrosense 11 - Soil Moisture Monitoring Equipment from Campbell Scientific Australia

By: Campbell Scientific Australia  11-Jul-2011
Keywords: Sensors, Monitoring Equipment, Environmental Monitoring Equipment

Hydrosense 11
New Hand Held Display

The Hydrosense II hand held has been designed to be compact and portable with the layout of the buttons allowing for operation with one hand. An integrated GPS tags each measurement with a latitude and longitude. Zones can be created on the unit which group measurements together so that average soil moisture can be calculated for an area. The current position and zone are shown on the display so that measurements can be taken in the same zone. Data storage has been added to allow up to 1500 measurements to be stored on the device. The data can then be downloaded to a PC via Bluetooth for viewing and archiving.

New Soil Moisture Probe
The new soil moisture probe uses the same accurate measurement technique as the old probe, but the probe housing has been redesigned to aid insertion into and removal from hard soils.  The probe rods are secured to the probe housing with ferrule nuts to provide extra stability during insertion. A moulded plastic grip connects the sensor cable to housing to provide better grip.
New PC software has been developed to make the most of the data storage capability of the Hydrosense II.  The software connects to the hand held via Bluetooth to avoid the need for extra cables.
The software will allow the user to:
-View data in table and chart views
-Edit zone positions and sizes
-Change device settings
-Export data to CSV to interface with 3rd party software
-View zones and measurements in Google Earth

Keywords: Environmental Monitoring Equipment, Environmental Sensors, Measurement and Control Systems, Measuring and Controlling Devices, Monitoring Equipment, Sensors

Contact Campbell Scientific Australia

Email

Print this page

Other products and services from Campbell Scientific Australia

CR800 Series Measurement and Control Systems - Data Loggers from Campbell Scientific Australia thumbnail
09-Nov-2011

CR800 Series Measurement and Control Systems - Data Loggers

The CR800 series of data loggers are rugged DAQ instruments with research grade performance.


CR1000 Data Logger - Measurement and Control Module from Campbell Scientific Australia thumbnail
09-Nov-2011

CR1000 Data Logger - Measurement and Control Module

The CR1000 data logger is a rugged data acquisition device with research grade performance.


OBS500 Turbidity Probe with Antifouling from Campbell Scientific Australia thumbnail
09-Nov-2011

OBS500 Turbidity Probe with Antifouling

Research grade turbidity sensor with antifouling and shutter/wiper mechanism.


CC5MPX Digital Camera from Campbell Scientific Australia thumbnail
11-Jul-2011

CC5MPX Digital Camera

The CC5MPX is a low power, high-resolution digital network camera with video capabilities.


SG000 Strike Guard Lightning Sensor from Campbell Scientific Australia thumbnail
11-Jul-2011

SG000 Strike Guard Lightning Sensor

The SG000 is an optical-coincidence lightning sensor that detects actual lightning strikes for up to 20 miles away.


CWS220A Wireless Infrared Radiometer from Campbell Scientific Australia thumbnail
11-Jul-2011

CWS220A Wireless Infrared Radiometer

The CWS220A provides a non-contact means of measuring the surface temperature of an object or surface by sensing the infrared radiation given off by the subject.


CS650 Soil Water Content Reflectometer from Campbell Scientific Australia thumbnail
11-Jul-2011

CS650 Soil Water Content Reflectometer

Th e CS650 Soil Water Content Reflectometer uses innovative techniques to monitor soil volumetric water content, bulk electrical conductivity, and temperature.


CS511-L Dissolved Oxygen Probe from Campbell Scientific Australia thumbnail
24-Aug-2010

CS511-L Dissolved Oxygen Probe

Uses a galvanic cell. Requires 2.5" submersion depth and 2 inches per second minimum water flow across membrane. Measures temperature with a thermistor


CNR4 - Net Radiometer from Campbell Scientific Australia thumbnail
24-Aug-2010

CNR4 - Net Radiometer

High accuracy - compatible with Campbell's CR1000, CR3000 and CR5000 data loggers - optional ventilation unit with heater


EC150 Open Path Has Analyser from Campbell Scientific Australia thumbnail
24-Aug-2010

EC150 Open Path Has Analyser

Unique optical layout allows for a slim aerodynamic shape with minimal wind distortion and body heating.


ET107 - Evapotranspiration Weather Station from Campbell Scientific Australia thumbnail
24-Aug-2010

ET107 - Evapotranspiration Weather Station

Preconfigured ETo station calculates potential ET, allowing you to control your water usage Uses standard suite of meteorological sensors.


Data Loggers - DAQ - Data Acquisition Systems from Campbell Scientific Australia thumbnail
24-Aug-2010

Data Loggers - DAQ - Data Acquisition Systems

Rugged, reliable, adaptable data acquisition systems with industry recognised support