Data Loggers - DAQ - Data Acquisition Systems

Data Loggers - DAQ - Data Acquisition Systems from Campbell Scientific Australia

By: Campbell Scientific Australia  24-Aug-2010
Keywords: Monitoring Equipment, Data Loggers, Data Acquisition Systems

Campbell Scientific data loggers are at the centre of our rugged, reliable data acquisition (DAQ) systems.The data loggers share similar measurement and programming capabilities; selection of the appropriate data logger depends mainly on the type, number, precision, and speed of measurements required. Multiplexers and/or SDM devices may be added to augment measurement and control capabilities that include:

  •     - measuring most sensors
  •     - providing non-volatile data storage and on-board battery-backed clock (excludes CR7)
  •     - on-board data processing
  •     - initiating measurement and control functions based on time or event
  •     - controlling external devices such as pumps, motors, alarms, freezers, valves, etc.
  •     - using our PC support software or keyboard/display to program
  •     - operating independently of ac power, computers, and human interaction
  •     - consuming minimal power from a 12 Vdc source
  •     - interfacing with on-site and telecommunication devices such as telephone modems (including cellular and voice-synthesized), short haul modems, radio transceivers, satellite transmitters, and ethernet interfaces

Keywords: Data Acquisition Systems, Data Loggers, Data Loggers & Recorders, Data Logging System, Environmental Monitoring Equipment, Event Recorders, Measurement and Control Systems, Measuring and Controlling Devices, Monitoring Equipment

Contact Campbell Scientific Australia

Email

Print this page

Other products and services from Campbell Scientific Australia

CR800 Series Measurement and Control Systems - Data Loggers from Campbell Scientific Australia thumbnail
09-Nov-2011

CR800 Series Measurement and Control Systems - Data Loggers

The CR800 series of data loggers are rugged DAQ instruments with research grade performance.


CR1000 Data Logger - Measurement and Control Module from Campbell Scientific Australia thumbnail
09-Nov-2011

CR1000 Data Logger - Measurement and Control Module

The CR1000 data logger is a rugged data acquisition device with research grade performance.


OBS500 Turbidity Probe with Antifouling from Campbell Scientific Australia thumbnail
09-Nov-2011

OBS500 Turbidity Probe with Antifouling

Research grade turbidity sensor with antifouling and shutter/wiper mechanism.


CC5MPX Digital Camera from Campbell Scientific Australia thumbnail
11-Jul-2011

CC5MPX Digital Camera

The CC5MPX is a low power, high-resolution digital network camera with video capabilities.


SG000 Strike Guard Lightning Sensor from Campbell Scientific Australia thumbnail
11-Jul-2011

SG000 Strike Guard Lightning Sensor

The SG000 is an optical-coincidence lightning sensor that detects actual lightning strikes for up to 20 miles away.


CWS220A Wireless Infrared Radiometer from Campbell Scientific Australia thumbnail
11-Jul-2011

CWS220A Wireless Infrared Radiometer

The CWS220A provides a non-contact means of measuring the surface temperature of an object or surface by sensing the infrared radiation given off by the subject.


CS650 Soil Water Content Reflectometer from Campbell Scientific Australia thumbnail
11-Jul-2011

CS650 Soil Water Content Reflectometer

Th e CS650 Soil Water Content Reflectometer uses innovative techniques to monitor soil volumetric water content, bulk electrical conductivity, and temperature.


Hydrosense 11 - Soil Moisture Monitoring Equipment from Campbell Scientific Australia thumbnail
11-Jul-2011

Hydrosense 11 - Soil Moisture Monitoring Equipment

Compact, portable, hand-held soil moisture system.


CS511-L Dissolved Oxygen Probe from Campbell Scientific Australia thumbnail
24-Aug-2010

CS511-L Dissolved Oxygen Probe

Uses a galvanic cell. Requires 2.5" submersion depth and 2 inches per second minimum water flow across membrane. Measures temperature with a thermistor


CNR4 - Net Radiometer from Campbell Scientific Australia thumbnail
24-Aug-2010

CNR4 - Net Radiometer

High accuracy - compatible with Campbell's CR1000, CR3000 and CR5000 data loggers - optional ventilation unit with heater


EC150 Open Path Has Analyser from Campbell Scientific Australia thumbnail
24-Aug-2010

EC150 Open Path Has Analyser

Unique optical layout allows for a slim aerodynamic shape with minimal wind distortion and body heating.


ET107 - Evapotranspiration Weather Station from Campbell Scientific Australia thumbnail
24-Aug-2010

ET107 - Evapotranspiration Weather Station

Preconfigured ETo station calculates potential ET, allowing you to control your water usage Uses standard suite of meteorological sensors.