CR1000 Data Logger - Measurement and Control Module

CR1000 Data Logger - Measurement and Control Module from Campbell Scientific Australia

By: Campbell Scientific Australia  09-Nov-2011
Keywords: Monitoring Equipment, Data Loggers, Data Acquisition Systems

The CR1000 provides precision measurement capabilities in a rugged, battery-operated package. It consists of a measurement and control module and a wiring panel. Standard operating range is -25° to +50°C; an optional extended range of -55° to +85°C is available. Features • 4 Mbyte memory* • Program execution rate of up to 100 Hz • CS I/O and RS-232 serial ports • 13-bit analog to digital conversions • 16-bit H8S Renesas Microcontroller with 32-bit internal CPU architecture • Temperature compensated real-time clock • Background system calibration for accurate measurements over time and temperature changes • Single DAC used for excitation and measurements to give ratio metric measurements • Gas Discharge Tube (GDT) protected inputs • Data values stored in tables with a time stamp and record number • Battery-backed SRAM memory and clock ensuring data, programs, and accurate time are maintained while the CR1000 is disconnected from its main power source • Serial communications with serial sensors and devices supported via I/O port pairs • PakBus®, Modbus, DNP3, TCP/IP, FTP, and SMTP protocols supported The module measures sensors, drives direct communications and telecommunications, reduces data, controls external devices, and stores data and programs in on-board, non-volatile storage. Th e electronics are RF shielded and glitch protected by the sealed, stainless steel canister. A battery-backed clock assures accurate timekeeping. The module can simultaneously provide measurement and communication functions. The on-board, BASIC-like programming language supports data processing and analysis routines.

Keywords: Data Acquisition Systems, Data Loggers, Data Logging System, Environmental Monitoring Equipment, Measurement and Control Systems, Monitoring Equipment

Contact Campbell Scientific Australia

Email

Print this page

Other products and services from Campbell Scientific Australia

CR800 Series Measurement and Control Systems - Data Loggers from Campbell Scientific Australia thumbnail
09-Nov-2011

CR800 Series Measurement and Control Systems - Data Loggers

The CR800 series of data loggers are rugged DAQ instruments with research grade performance.


OBS500 Turbidity Probe with Antifouling from Campbell Scientific Australia thumbnail
09-Nov-2011

OBS500 Turbidity Probe with Antifouling

Research grade turbidity sensor with antifouling and shutter/wiper mechanism.


CC5MPX Digital Camera from Campbell Scientific Australia thumbnail
11-Jul-2011

CC5MPX Digital Camera

The CC5MPX is a low power, high-resolution digital network camera with video capabilities.


SG000 Strike Guard Lightning Sensor from Campbell Scientific Australia thumbnail
11-Jul-2011

SG000 Strike Guard Lightning Sensor

The SG000 is an optical-coincidence lightning sensor that detects actual lightning strikes for up to 20 miles away.


CWS220A Wireless Infrared Radiometer from Campbell Scientific Australia thumbnail
11-Jul-2011

CWS220A Wireless Infrared Radiometer

The CWS220A provides a non-contact means of measuring the surface temperature of an object or surface by sensing the infrared radiation given off by the subject.


CS650 Soil Water Content Reflectometer from Campbell Scientific Australia thumbnail
11-Jul-2011

CS650 Soil Water Content Reflectometer

Th e CS650 Soil Water Content Reflectometer uses innovative techniques to monitor soil volumetric water content, bulk electrical conductivity, and temperature.


Hydrosense 11 - Soil Moisture Monitoring Equipment from Campbell Scientific Australia thumbnail
11-Jul-2011

Hydrosense 11 - Soil Moisture Monitoring Equipment

Compact, portable, hand-held soil moisture system.


CS511-L Dissolved Oxygen Probe from Campbell Scientific Australia thumbnail
24-Aug-2010

CS511-L Dissolved Oxygen Probe

Uses a galvanic cell. Requires 2.5" submersion depth and 2 inches per second minimum water flow across membrane. Measures temperature with a thermistor


CNR4 - Net Radiometer from Campbell Scientific Australia thumbnail
24-Aug-2010

CNR4 - Net Radiometer

High accuracy - compatible with Campbell's CR1000, CR3000 and CR5000 data loggers - optional ventilation unit with heater


EC150 Open Path Has Analyser from Campbell Scientific Australia thumbnail
24-Aug-2010

EC150 Open Path Has Analyser

Unique optical layout allows for a slim aerodynamic shape with minimal wind distortion and body heating.


ET107 - Evapotranspiration Weather Station from Campbell Scientific Australia thumbnail
24-Aug-2010

ET107 - Evapotranspiration Weather Station

Preconfigured ETo station calculates potential ET, allowing you to control your water usage Uses standard suite of meteorological sensors.


Data Loggers - DAQ - Data Acquisition Systems from Campbell Scientific Australia thumbnail
24-Aug-2010

Data Loggers - DAQ - Data Acquisition Systems

Rugged, reliable, adaptable data acquisition systems with industry recognised support