Glenair Backshell and Accessory Identification

By: Connector-Tech ALS Pty Ltd  20-Jun-2014
Keywords: Military, Air Force, Australian Defence Force

The selection of the most appropriate backshell is a critical factor in the performance of any connector solution. The electrical, environmental and mechanical conditions to which the connector will be exposed will dictate your choice of backshell or accessory, however, the vast array of backshell types made available to a specifying engineer or designer by Glenair can make determining the right accessory a challenge. The first step is to consult the Glenair Circular Connector Backshell and Accessories catalogue. It contains the complete specifications of every backshell, dummy-storage receptacle, protective cover, shrink-boot adapter, strain relief and other termination available. You can find the catalogue on our website at the following address: http://www.connector-techals.com.au/datasheets/Glenair-M85049-Backshells.pdf. Your starting point should be the part number development tree found on each page. Our sales technicians are always available on 07 3275 3188 to guide you through the specification process and assist with any questions you may have.

Keywords: Air Force, Australian Defence Force, Defence Industry, Glenair, Military, Mil-Spec

Contact Connector-Tech ALS Pty Ltd

Email

Print this page

Other products and services from Connector-Tech ALS Pty Ltd

Socapex 19-Pin Compatible Leads from Phase 3 from Connector-Tech ALS Pty Ltd thumbnail
03-Jul-2014

Socapex 19-Pin Compatible Leads from Phase 3

Complete cable assemblies with Phase 3's 19-Pin Socapex-compatible connectors for entertainment lighting applications!


16-May-2012

Glenair Series 80 "Mighty Mouse"

Glenair Series 80 "Mighty Mouse"


MIL-C-26482 Series 2 at Excellent Prices! from Connector-Tech ALS Pty Ltd thumbnail
16-May-2012

MIL-C-26482 Series 2 at Excellent Prices!

Low cost fully Mil-Qualified (QPL) versions from Corsair USA


Explosion Proof Connectors from Connector-Tech ALS Pty Ltd thumbnail
16-May-2012

Explosion Proof Connectors

Amphenol Amphe-EX Connectors for Hazardous Environments.High performance connectors designed for use in: * High temperatures * Harsh chemicals * Potentially


Sureseal Low Cost IP67 Rubberized Submersible Connectors from Connector-Tech ALS Pty Ltd thumbnail
16-May-2012

Sureseal Low Cost IP67 Rubberized Submersible Connectors

Low Cost IP67 Rubberized Submersible Connectors.


Heavy Duty Rectangular Multipole from Connector-Tech ALS Pty Ltd thumbnail
16-May-2012

Heavy Duty Rectangular Multipole

Overview Another industry standard for reliable connection of power and control circuits. Housed in rugged die-cast aluminium housings that


Custom Cable Harness Assemblies from Connector-Tech ALS Pty Ltd thumbnail
16-May-2012

Custom Cable Harness Assemblies

Connector~Tech ALS  now has the capability to supply fully completed custom cable harness assemblies. From a simple connector with


16-May-2012

Chemical Resistant SB Anderson Connectors

In addition to the standard Anderson SB connector range that has become the industry standard for DC power in many


Amphenol Ecomate IP67 Plastic Connectors from Connector-Tech ALS Pty Ltd thumbnail
16-May-2012

Amphenol Ecomate IP67 Plastic Connectors

Economical plastic IP67 waterproof 3+Earth and 7pin power connectors.


Deutsch DT Commercial Connectors from Connector-Tech ALS Pty Ltd thumbnail
07-Jun-2011

Deutsch DT Commercial Connectors

Deutsch DT DTM DTP DTHD plastic, Low cost waterproof plastic connectors , Will withstand immersion to 3 feet of water


Anderson Airmotive Ground Power & Battery Connectors for Aircraft from Connector-Tech ALS Pty Ltd thumbnail
07-Jun-2011

Anderson Airmotive Ground Power & Battery Connectors for Aircraft

Anderson Airmotive Ground Power & Battery Connectors for Aircraft


Anderson Finger proof 50A from Connector-Tech ALS Pty Ltd thumbnail
30-Aug-2008

Anderson Finger proof 50A

Finger Proof 50Amp genderless Anderson Plug - Minimizes the potential contact with live contacts


HCC Industries from Connector-Tech ALS Pty Ltd thumbnail
30-Aug-2008

HCC Industries

 Connector~Tech has been appointed Australian agent for hermetic products from HCC Industries


Merlin™ Custom Made Precision Wire Wound Resistors from Connector-Tech ALS Pty Ltd thumbnail
20-Jun-2008

Merlin™ Custom Made Precision Wire Wound Resistors

Australian Made with lifetime warranty. High Surface Temperature Mechanical Strength, The Special Resilient Tropic-Proof Coating is Moisture Resistant, will withstand high thermal cycling operating temperatures of upto 350°C. Silver Soldered Terminations. No Internal Corrosion Spots. Highest Available Resistance Range Wattages from 20 to 2000+. Stability of better than 0.02% / 1000 hrs on max load @ 70°C. Tolerances of down to less than 0.1% are available, Standard is 5-10%