If you have your own trailer, we can supply and fit any of our camper tents for you. We can make the tent to suit left or right hinged tail gates (i.e. tent opening to either the passenger side or the driver's side) and almost any height trailer. Tops can be fitted to trailers measuring 7’x4’ (ideal), 7’x5’, 8’x5’ and 6’x4’. Keep in mind that for 8’ trailers, an infill panel will be needed for the extra 12 inches at the drawbar end of the trailer. Any additional work required to modify your trailer is charged at $70ph plus materials.
All our camper tops are made from ‘top of the line’ 15 ounce Australian Made ‘Dynaproofed’ canvas on both the roof and the walls and feature extra tough rip stop PVC sewn in 'tub style' floors, midge proof screens, reinforced ‘bows’ (roof supports), double thickness reinforced canvas corners and a ‘storm flap’ around the floor of the tent on the outside. All windows with the exception of the large end window (which becomes an outside awning) zip up from the inside so there’s no need to go out in the rain to zip up! All tents come standard with awning, Queen size Dunlop 150mm thick foam mattress and sufficient poles, pegs and ropes for a basic set up. Spreader bars are available as an option to really tighten up the canvas in extra windy or rainy conditions.
Our bed frames are made from extra strong 50x50mm gal steel with a hinged mattress board for easy access to your trailer from inside the tent. Even the in-fills beside the mattress board (the part that’s exposed to the road) are made from gal sheet, not timber like most others. We can either bolt the camper top to your trailer at no extra charge or fit with hinges, gas struts and adjustable and lockable over centre latches for an extra $250. This is the ideal way to go as it makes it just so easy to load and unload your trailer at home or when you first arrive at the campsite. If you live interstate, we can supply all the necessary hinges, struts and strut mounts and over centre latches to make the job easy for you.
When ordering, we need to know the inside measurements of your trailer as well as the overall height (measured nearest the axle with the trailer level). Our Off Road trailers measure 1100mm high and our On Road 1000mm but if your trailer is up to 100mm higher or lower, we can make the tent to suit at no extra charge. If your trailer is higher than 1200mm, contact us for a quote.