Termite inspections

Termite inspections from Building & Pest Inspection Services Pty Ltd

By: Building & Pest Inspection Services Pty Ltd  15-Nov-2015
Keywords: Pest Management, Pest Services, Termite Control

Termite Inspection & Timber Pest Inspection A Pre-purchase Pest Inspection will determine whether the structure is affected by termites, wood borers, fungi or chemical delignification. We will conduct a thorough examination of all accessible areas of the property in order to compile a report detailing past as well as present infestation. Termites can cause extensive damage in a relatively short amount of time so our reports also include precautionary strategies to prevent an attack. The Pre-purchase Pest Inspection will identify: Termites Borers Fungal decay Chemical delignification Our report will include an inspection of landscape timbers (including fences), outbuildings, the interior and exterior of the property (including roof space and subfloor). The detection equipment we have available includes a Bore n Scope and thermal imaging camera. We’ll also identify conditions conducive to a timber pest attack including but not limited to: The presence of excessive moisture Inadequate subfloor ventilation The use of untreated or unsuitable timber Breaches of a termite barrier system We have non-invasive techniques to discover the termites within a dwelling, such as; Termatrac - Radar that detects movement of termites dwelling within walls and under carpets. Moisture Meters - A materials moisture detector that picks up on the moisture within walls cavities which termites could be attracted to. Thermal Imaging Cameras - Used to locate the termite workings and termites heat trails within a roof space, wall cavity, subfloor and areas otherwise not accessible. Thermal Imaging CameraWe use the latest in termite inspection technologies the Flir E-8 infrared camera. Thermal imaging cameras have an impressive resolution (up to 320 x 240 pixels) so we obtain clearer temperature information to help locate the potential termite ingress to the structure. The FLIR camera makes early detects only minor temperature changes. The timber pest inspectors are fully trained to use of the FLIR e8 and to interpret this top of the range piece of equipment to ensure that they picked up on all potential termite problems within a home. All termites, pest control and timber pest inspection requirements are also catered for. Our Licence Queensland Health Pest management Technician Licence PMT-O-12670

Keywords: Flea Control, Pest Management, Pest Services, Rat Control, Spider Control, Termite, Termite & Pest Control, Termite Control, Termite Eradication, Termite Inspection, Termite Protection, Termite Treatment

Contact Building & Pest Inspection Services Pty Ltd


Print this page

Other products and services from Building & Pest Inspection Services Pty Ltd


Dilapidation survey

Dilapidation Surveys Dilapidation surveys are a record of the current condition of a property before undertaking of adjacent development or


Asbestos inspections

Asbestos Registers and Audits Asbestos Inspections You require an Asbestos Inspection our fully qualified inspectors can carry out the inspection


Pool safety Inspections

Pool Safety Inspections & Certificates Out of everything, your family and your families safety is number one. At Building and


Building inspections

Building Inspections A Pre-purchase Building Inspection by Building and Pest Inspection Services will provide you with a thorough report on