High Security Door Units
Rivers Locking Systems
Metal, Door Frame, Exit Doors
High Security Door Units
Rivers Heavy Duty Security Door when fitted to a Rivers “wrap around” pressed metal Door Frame offers the ultimate in solid core door security. The door leaf consists of a moisture resistant solid timber core pan sheeted on the external side with 1.6mm Zincanneal steel. Drill resistant steel can also be used as an optional extra. The edges of the panel are folded around the side of the door core and fastened with screws. The door leaf can be sheeted on both external and internal faces for additional strength. The Rivers Door Frame is a “split frame” design and is made from 1.6mm Zincanneal steel. The Rivers Door Frame comes in two pieces in order for it to wrap-around the entire thickness of the wall. The Heavy Duty Security Door Unit is not limited to standard opening / door sizes. Rivers will fabricate a Door Unit in a single or double door configuration to suit any opening. Optional extras include, but are not limited to, security air relief grills, bandit-resistant or bullet-proof glass viewing panels, eye viewers, door seals and security hatches for cash handling.
Rivers Heavy Duty Security Door Units are recommended for in strong and safe rooms, document storage and archives areas, financial institutions, schools, government buildings, shopping centers, council amenities buildings, computer rooms, wharehouses, record storage rooms, retail outlets, front and rear entry doors and fire exists. Rivers Heavy Duty Security Door Units are ideal for any building perimeter or internal application where security and protection of life and property is critical.
Standard hardware supplied with a Rivers Heavy Duty Security Door Unit includes heavy duty ball-bearing hinges and two (2) off anti-lift off pins per door leaf. It is strongly recommended that the Door Unit be fitted with a Rivers Model D two point locking bar or Rivers four point locking system (refer elsewhere in this brochure). Other standard door hardware can be fitted to suit the application. Refer to Rivers sales staff for advice.
Standard finish is one coat of zinc rich primer leaving the door and frame in a ready to paint condition. Durable polyester powder coat can be applied in any standard Dulux colour upon request. Special colours are available.
Rivers split frame comes in two ‘halves’. When positioned in the opening, the back halve of the frame meets the front halve of the frame to fully encompass the wall. The frame halves are then welded together and fixed through the entire thickness of the wall using four bolts in each side jamb. The door blade is then hang complete with anti-lift off pins. If a Rivers two or four point lock is specified it will be factory fitted to the door blade making site installation quicker and easier. Rivers can provide experienced installers to correctly fit the Door Unit ensuring security and reliable service.
, Door Units
, Exit Doors
, Rivers Locking