Welding Positioner Welding Rotator
Tokentools Welding Equipment Supplies
Welding Equipment, Welding Positioner, Welding Rotator,
If you are looking to increase your speed of fabrication and weld finish on circular objects perhaps you should consider our welding rotator and weld positioner. A quality built unit featuring a digital programmable controller that will control the rotational angle, the dwell time and repeat. Need to weld 45 rotational degrees? No problem, just key it in and push down on the foot control. Whilst you are welding the controller measures out the 45 degree rotation and stops. You have a consistent weld without the need to move your torch around the job. The same applies if you want to weld around the perimeter of a circular object. The controller supports angles from one degree up to thousands of degrees (multiple revolutions). Dwell time enables the mandatory rest period between operations so you could rotate for example 30 degrees and then stope for 20 seconds before repeating.
The rotator is capable of supporting 50 kilograms whilst in the horizontal position or 25 kilos whilst vertical. There are numerous adjustments available to lock the table into an inclined position between horizontal and vertical. Earthing of your workpiece is achieved via the Dinse 35-70 socket on the rear, a plug is supplied with the unit to enable easy connection to your existing welder.
Speed is adjustable via the front mounted potentiometer which supplies a pulse width modulated signal to the high torque motor / gearbox combo. Rotational direction is set via a toggle switch and triggering of the rotating mode can be achieved with the supplied foot control or the front panel mounted push button switch.
, Welding Positioner
, Welding Rotator
Contact Tokentools Welding Equipment Supplies
Print this page