GenTemp remote GSM temperature monitoring and alarm system

GenTemp remote GSM temperature monitoring and alarm system from Orbit Communications Pty Ltd

By: Orbit Communications Pty Ltd  15-Nov-2010
Keywords: Control Systems, Computer Network Equipment, Sensors

 

GenTemp protects your valuable computing resources by sending an immediate SMS alert message directly up to 5 mobile phones. The remote temperature alarm system operates on both GSM and Next-G/3G mobile phone networks and comes with a high gain antenna to ensure reliable contact with your mobile phone network in weaker signal areas.

GenTemp continuously monitors the temperature of the server room and sends an alarm via the GSM or Next-G mobile phone network as soon as the temperature rises above the user-programmable temperature alarm point. 

The user-programmable temperature alarm trip-point can be set anywhere from -50 to +150 Degrees Celsius. Typically the temperature alarm trip-point would be set around 28 to 33 Degrees Celsius.

A user can send a text commend message remotely to the GenTemp alarm system at any time from any mobile phone to request the current status of the system. GenTemp will respond by sending the current temperature back to the mobile phone that requested the information. Software supplied with the GenTemp GSM temperature alarm system enables a user-defined password to be set to prevent unauthorised use of the system.

In addition to requesting the current temperature, users can remotely switch a Digital output ON or OFF within the GenTemp unit. This output provides a convenient method to switching a Fan or other cooling device to provide temporary control of the temperature until the maintenance person can attend the remote site to fix the cooling issue.

GenTemp can be supplied with optional battery backup system. The backup battery is maintained in a fully charged state. In event of a power failure, the system will run from the backup battery. The system will then send a Mains Failure alarm message directly up to 5 mobile phones. The battery voltage is monitored an in event of low battery voltage, a low battery alarm is sent remotely via the GSM or Next-G mobile phone network.

GenTemp can be supplied fitted with optional display, keypad and local alarm indication. This provides instant visual indication current temperature as well as a local audible and visual alarm in case of over-temperature condition in addition to the remote alarm indication by GSM or Next-G mobile phone network.

GenTemp has been engineered to provide a reliable solution for remote monitoring of room temperature and ongoing dependable performance.

The system is designed, manufactured and 100% fully supported in Australia by Orbit Communications Pty Ltd.

Keywords: Automation, Computer Network Equipment, Control Systems, Gauge - Temperature, Indicators, Radio Technology, Remote Monitoring, Remote Wireless, Sensors, Switches-Temperature, Temperature & Pressure T&M, Temperature Alarm, Temperature Controls, Temperature Sensors, Temperature Switches, Temperature Transmitters, Transmitters, Transmitters-Temperature, Wireless Data, Wireless Remote Monitoring, Wireless Solutions, Wireless Telemetry,

Contact Orbit Communications Pty Ltd

Email

Print this page

Other products and services from Orbit Communications Pty Ltd

Wireless Pivot irrigation monitor/alarm system from Orbit Communications Pty Ltd thumbnail
15-Nov-2010

Wireless Pivot irrigation monitor/alarm system

Automatically switches pump off and inhibits starting if error with pivot Reliable, ongoing dependable service with fully monitored wireless link Optional SMS text alert direct to your mobile phone


GSM remote tank alarm system from Orbit Communications Pty Ltd thumbnail
20-Oct-2010

GSM remote tank alarm system

Reliable remote GSM alarm for water tanks, sewerage tanks, irrigation. Sends alert direct to mobile phone on GSM or Next-G mobile phone network. Control relays using mobile phone


EverPump wireless pump control system from Orbit Communications Pty Ltd thumbnail
20-Oct-2010

EverPump wireless pump control system

           Peace of mind provided by instant alarm notification ·          3 Year manufacturer warranty ·          Free technical and application support direct from the manufacturer ·          Australian designed, Australian made ·          Saves dollars installing long cables between


BodyGuard proxmity warning system - 4th generation release from Orbit Communications Pty Ltd thumbnail
05-Oct-2010

BodyGuard proxmity warning system - 4th generation release

  ·          Effective reduction of risk of collision in the workplace ·          Demonstrates duty of care ·          Effective pro-active tool for risk management ·          IP67 ingress protection for harsh industrial environments (dust, dirt, smoke etc) ·          Clear Visual and A


Collision Avoidance system lowers risk of collision between vehicles and personnel from Orbit Communications Pty Ltd thumbnail
13-Mar-2010

Collision Avoidance system lowers risk of collision between vehicles and personnel

 BodyGuard proximity detection and alert system helps lower risk of collision in the workplace. Check out the most recent demonstration video at YouTube. (Search Forklift Proximity)


Proximty Alarm system for vehicles and personnel from Orbit Communications Pty Ltd thumbnail
01-Mar-2010

Proximty Alarm system for vehicles and personnel

  Typical Applications ü   Warehouses and other Logistic centres (Forklifts, Personnel, Work areas) ü   Gantry Cranes at freight terminals and other loading areas ü   Indoor Gantry cranes for processing plants ü   Haul Road truck, utility vehicles and personnel at open-cut mines ü   Truck mounted cranes (prevent operator being hit by boom) ü   Spotting in front of vehicles (forestry, shipping dock etc) ü   Front-end Loaders ü   Small excav


Vehicle Proximity Alert from Orbit Communications Pty Ltd thumbnail
01-Mar-2010

Vehicle Proximity Alert

  ü   Effective lowers risk of collision by alerting driver to potential hazards ü   Adds another layer of effectiveness to existing safety and risk management systems ü   User Programmable proximity detection and alert zone from around 3m to over 100m ü   Multiple Proximity Detector Units can be installed on a larger vehicles for front and rear detection ü   Suitable for 12 and 24V vehicle electrical systems ü   Rugged IP66 rated weatherproof enclosur


Collision Avoidance System from Orbit Communications Pty Ltd thumbnail
01-Mar-2010

Collision Avoidance System

  ü   Effective lowers risk of collision by alerting driver to potential hazards ü   Adds another layer of effectiveness to existing safety and risk management systems ü   User Programmable proximity detection and alert zone from around 3m to over 100m ü   Multiple Proximity Detector Units can be installed on a larger vehicles for front and rear detection ü   Suitable for 12 and 24V vehicle electrical systems ü   Rugged IP66 rated weatherproof enclosur


Wireless Pump control system saves time and cost from Orbit Communications Pty Ltd thumbnail
10-Nov-2009

Wireless Pump control system saves time and cost

 Efficient wireless pump control system saves cost and time. Helps to effectively manage valuable resources.


Vehicle and Personnel proximity warning system from Orbit Communications Pty Ltd thumbnail
10-Nov-2009

Vehicle and Personnel proximity warning system

Save lives by lower risk of collision using Orbit's revolutionary proxmity detection and warning system


forklift and personal proximity alarm system from Orbit Communications Pty Ltd thumbnail
19-Aug-2008

forklift and personal proximity alarm system

Proximity alarm for forklifts and personnelOrbit Communications Pty Ltd are pleased to announce the release of the revolutionary new BodyGuard proximity alarm system. BodyGuard is an industrial proximity alarm system that provides an ideal solution for warehouse applications where forklifts and personnel work in close proximity to each other.


Wireless Remote system for Level monitoring from Orbit Communications Pty Ltd thumbnail
23-Jul-2008

Wireless Remote system for Level monitoring

Orbit Communications is pleased to annouce the release of the AnalogBridge wireless current monitor. The AnalogBridge has been specifically designed to offer a replacement for cable between analogue sensors (such as 4-20mA and voltage pressure sensors, water level sensors, temperature sensors) that provide a current or voltage output. Wireless remote 4-20mA current monitor Dam Level Monitoring Flow Monitoring Remote Pressure Sensing Remote Temperature Monitor Process monitoring Replacement for 4


Wireless Pump controller saves time and money from Orbit Communications Pty Ltd thumbnail
23-Jul-2008

Wireless Pump controller saves time and money

Orbit Communications Pty Ltd is proud to announce the release of the new EverPump wireless tank monitor and pump control system. Now you can easily remotely monitor the state of a remote water storage device such as a dam, reservoir or tank and control a pump to ensure the water level is maintained. The EverPump wireless water tank monitoring and alarm system has been designed to offer dependable ongoing performance with up to 10km range between units. EverPump has an optional remote monitor/con


Reliable wireless switching systems from Orbit Communications Pty Ltd thumbnail
22-Jul-2008

Reliable wireless switching systems

Orbit Communications announce the release of RTU series wireless switching systems. The RTU wireless switching systems are available with a variety of input and output configurations that make them ideal for applications such as Wireless relay switching Pulse transmission Level monitoring Temperature monitoring Remote pump control and tank monitoring Process monitoring and control Remote status indication