If you are looking for a budget solution
to restrict vehicle and pedestrian access to certain areas of your site then
the ZoneGuard™ manual boom gate from is the product for you. Zone Guard is a
range of manually operated boom gates to control driveways up to 5m in width
without the use of counterbalance weight.
ZoneGuard™ is easy to use, and provides
you with the assurance that you have provided a safe system for securing
hazardous areas at your site. ZoneGuard™ is suitable for direct mounting to a
structural column, or alternatively can be floor mounted using the included
mounting post assembly.
The product is available with a 5 metre
boom arm length as standard, standard colour is white with class 2 striping.
Other boom arm lengths can be manufactured to order. Optionally, the product
can be powdercoated to your choice of colour.
Part Number : #
‐ Ball bearing shaft for
smooth, silent operation.
‐ Spring loaded positive
locking mechanism at both ends of travel.
‐ Fully counterbalanced for
ease of use.
‐ Soft stops at both ends of
‐ Class 2 reflective striping
fitted to both the post and the boom arm.
‐ “Breakaway” bolts to avoid
mechanism damage in the event of vandalism.
All steel components zinc
plated for superior corrosion resistance.
‐ Boom Arm Length: 5m as
standard (other Lengths to orders)
‐ Boom Arm Material: 80mm
O.D. Aluminium tube, 3mm wall
‐ Spring Bearing: 80mm deep
groove ball bearing
‐ End Stops: Cammed action
onto urethane bush
‐ Locking Mechanism: Spring
Loaded, Hardened alloy‐steel pin
‐ Breakaway Bolts: 4 x M8
nylon to fail at 60 KGF
‐ Shipping Weight: 47kg
‐ Mounting Holes: 4 x 11 mm
diameter to suit M10 x 30 Grade 8 bolts
‐ Mounting Post: 150x100mm
steel RHS c/w pressed steel cap
‐ Base Plate: 10mm mild steel
‐ Boom Arm Height: 1100mm
above base plate
‐ Shipping Weight: 28kg
Holes: 18mm dia. holes for 16mm Chemical Anchors (Not Supplied)