Dow Styrofoam XPS Blue Modelling Foam
Dynamic Composite Technologies Pty Ltd
Extruded Polystyrene, Closed Cell Foam, Blue Foam
Dow Styrofoam closed cell rigid blue modelling foam
Dow Styrofoam extruded polystyrene (XPS) blue foam has been used with great success as a modelling foam for many years. Strong, lightweight and versatile - Dow Styrofoam XPS has been used for everything from competition grade surfboards to remote control vehicles, outdoor water features to model railway dioramas, architectural models and even triathlon racing bike frames.
Dow Styrofoam XPS boards are lightweight with a high compressive strength rating. The unique closed cell structure/cell shape of Dow Styrofoam XPS results in no voids between cells, the result of an exclusive extrusion process that assures uniform, predictable, stable physical properties.
Dow Styrofoam XPS is a thermoplastic and retreats from fire. It also contains a flame retardant additive to inhibit accidental ignition from small fire sources eg., over-heated wires or welding sparks. The cell structure of Dow Styrofoam XPS enables it to resits all forms of water and moisture penetration.
Dow Styrofoam XPS is chemically and physiologically inert, it creates no dust and will not support mould or mildew and is non allergenic. Dow Styrofoam is not a known food source to vermin or insects.
Cutting and Shaping
Due to the homogeneous cell structure and uniform density of Dow Styrofoam XPS it can be cut accurately and to very close tolerances. Styrofoam is easy to cut and shape with a range of tools including a hotwire cutter, serrated knife, hacksaw, floral knife or X-Acto knife. To cut a thick piece, or several sheets stacked together, try using an old electric knife. DCT can cut your board to your required thickness and/or length from $10 per board. Note that DCT cannot cut your board into shapes.
Dow Styrofoam XPS can be painted with an acrylic craft and/or water based paint. Avoid using solvent based paints as these may damage the foam. Some spray paints are safe to use - read the label carefully to determine whether or not it is foam approved.
For a fast, sure bond, use a low-temperature glue gun (using a non-solvent base such as an epoxy resin and/or polyurethane adhesive) which can be purchased from your local hardware store.
Unit 8, 171-175 Newton Road,
Wetherill Park NSW 2164 Australia
T 02 8788 9555
F 02 9604 7468
E [email protected]
Monday to Friday from 8.00am to 4.00pm
Closed Saturday—Sunday and Public Holidays
Terms of payment
Cash, Visa* and Mastercard*
* Visa and Mastercard will incur a 2.5% surcharge
Architectural Modelling Foam
, Blue Foam
, Blue Modelling Foam
, Closed Cell Foam
, Diorama Foam
, Extruded Polystyrene
, High Density Rigid Foam
, Hobby Foam
, Kraft Foam
, Landscaping Foam
, Lightweight Rigid Foam
, Model Foam
, Model Railway Foam
, Outdoor Water Feature Foam
, Sculpture Foam
, Signwriting Foam
, Surfboard Foam
, Xps Foam