Dow Styrofoam SMTG XPS Insulation

Dow Styrofoam SMTG XPS Insulation from Dynamic Composite Technologies Pty Ltd

By: Dynamic Composite Technologies Pty Ltd  27-Nov-2012
Keywords: Roof Insulation, House Insulation, Wall Insulation

Details SMTG grade Dow Styrofoam is designed to be used as rigid thermal insulation in walls, floors, and roofing applications. Dow Styrofoam is an extruded polystyrene (XPS) board with a closed cell structure which means it won’t absorb moisture. The boards are designed with a tongue and grooved edge to ensure the boards lock together to prevent moisture passing through the joints where the tongue edge is up and the groove edge is facing down. Dow Styrofoam XPS offers excellent long term R-values that per unit thickness are superior to most alternative common insulation products. Applications - Exterior walls over studs or non-insulating sheathing like OSB or plywood interior walls - concrete blocks - Ceilings - cathedral, vaulted or flat ceilings, finished attic - Exterior foundation walls - Interior foundation walls - Crawl space Features - Tongue and grooved edge - High strength-to-weight ratio - Long term retained R-Value - Very low water absorption - Low susceptibility to rot, mould or fungal growth - Clean, odourless and free from irritating dust

Keywords: Blue Foam, Brick Wall Insulation, Cathedral Ceiling Insulation, Cavity Wall Insulation, Cold Roof Insulation, Commercial Insulation, Exterior Insulation, Extruded Polystyrene, Floor Insulation, Foam Insulation, House Insulation, Paving Insulation, Residential Insulation, Rigid Blue Foam Insulation, Roof Insulation, Timber Decking Insulation, Timber Floor Insulation, Tongue and Grooved Insulation, Under Slab Insulation, Wall Insulation,

Contact Dynamic Composite Technologies Pty Ltd

Email

Print this page

Other products and services from Dynamic Composite Technologies Pty Ltd

Vacuum Insulated Panels from Dynamic Composite Technologies Pty Ltd thumbnail
06-Mar-2014

Vacuum Insulated Panels

va-Q-tec vacuum insulation panels are now available in Australia for building and construction plus commercial refrigeration applications exclusively from Dynamic


ProctorGeo HC9 Spacer Mat from Dynamic Composite Technologies Pty Ltd thumbnail
30-Jul-2013

ProctorGeo HC9 Spacer Mat

Moisture can potentially build up under metal roof sheeting and cause structural damage and corrosion of the roof sheet. Designed for such applications, ProctorGeo HC9 Spacer Mat is a three dimensional shaped mesh of UV stabilized polypropylene monofilaments, tangled and fused together. Available from Dynamic Composite Technologies.


ProctorGeo Inverted Room Membrane Assembly IRMA from Dynamic Composite Technologies Pty Ltd thumbnail
30-Jul-2013

ProctorGeo Inverted Room Membrane Assembly IRMA

ProctorGeo IRMA is designed for use as a separating layer in ballasted or paved Inverted Roof Membrane Assembly (IRMA) flat roofs, available from Dynamic Composite Technologies.


Dow Styrofoam Roofmate SL-X from Dynamic Composite Technologies Pty Ltd thumbnail
30-Jul-2013

Dow Styrofoam Roofmate SL-X

Dow Styrofoam™ Roofmate SL-X™ extruded polystyrene (XPS) thermal insulation distributed by DCTech, is designed for installation above waterproofing membranes in


Nvelope Rainscreen Cladding Brackets from Dynamic Composite Technologies Pty Ltd thumbnail
30-Jul-2013

Nvelope Rainscreen Cladding Brackets

Nvelope Rainscreen cladding systems, distributed by Dynamic Composite Technologies, is a system solution for exterior architectural façades. Developed from the


Dow Styrofoam XPS Blue Modelling Foam from Dynamic Composite Technologies Pty Ltd thumbnail
28-Nov-2012

Dow Styrofoam XPS Blue Modelling Foam

Due to the homogeneous cell structure and uniform density of Dow Styrofoam XPS it can be cut accurately and to very close tolerances. Styrofoam is easy to cut and shape with a range of tools including a hotwire cutter, serrated knife, hacksaw, floral knife or X-Acto knife.


Dow Styrofoam RTM-X Extruded Polystyrene Insulation from Dynamic Composite Technologies Pty Ltd thumbnail
27-Nov-2012

Dow Styrofoam RTM-X Extruded Polystyrene Insulation

Dow Styrofoam RTM-X extruded polystyrene (XPS) thermal insulation has been specifically designed to withstand severe dynamic loads and stresses which may eventually lead to fatigue and failure. It is perfect for installation under or over the slab in ground bearing concrete floors and is suitable for use on suspended beam and block or timber floors. For sandwich panel cores, the lightweight, close tolerance, dust-free surface allows for excellent bonding to a wide variety of sheet materials.


Sanigrid all fibreglass ceiling grid system from Dynamic Composite Technologies Pty Ltd thumbnail
27-Nov-2012

Sanigrid all fibreglass ceiling grid system

Sanigrid Ceiling Grid system from Crane Composites - the all fibreglass grid system that will never rust and peel.


Innovative Wall Finishes from Dynamic Composite Technologies Pty Ltd thumbnail
27-Nov-2012

Innovative Wall Finishes

Stylish and hygienic interior fibreglass reinforced plastic wall liner panels with the look of wall paper that is easy to clean and hard wearing.


Glasbord with Surfaseal hygienic FRP wall and ceiling panels from Dynamic Composite Technologies Pty Ltd thumbnail
27-Nov-2012

Glasbord with Surfaseal hygienic FRP wall and ceiling panels

Glasbord with Surfaseal is made of fibreglass reinforced plastic. Glasbord is a durable, flexible building material that will never mould, mildew, rot or corrode. It exhibits excellent resistance to mild chemicals and moisture. When compared to ordinary FRP, Glasbord exhibits up to ten times cleanability, six times the stain resistance and twice the abrasion resistance.


Dow Styrofoam Floormate-X XPS Insulation from Dynamic Composite Technologies Pty Ltd thumbnail
27-Nov-2012

Dow Styrofoam Floormate-X XPS Insulation

Dow Styrofoam Floormate-X extruded polystyrene (XPS) insulation has been developed for use where attributes such as compressive strength, resistance to ground moisture and high thermal resistance are important considerations. Widely used in very low temperature climates as a thermally insulating backfill to protect civil engineering projects from freezing. For use as the thermal insulation layer in all floor types from housing to industrial buildings and cold stores.


Dow Styrofoam HD-X XPS Insulation from Dynamic Composite Technologies Pty Ltd thumbnail
27-Nov-2012

Dow Styrofoam HD-X XPS Insulation

Dow Styrofoam HD-X heavy load-bearing thermal insulation from Dynamic Composite Technologies supports heavy cargo loads and fork lift trucks in cold store floors and in roof panels to support high tensile loads.


Styrofoam XPS Deckmate Thermal Break Strips from Dynamic Composite Technologies Pty Ltd thumbnail
27-Nov-2012

Styrofoam XPS Deckmate Thermal Break Strips

Designed specifically to reduce the thermal loss on metal deck roof applications. Depending on construction method, in some metal deck roofs the insulation blanket can be compressed, which can reduce the thermal performance of the roof system. Styrofoam Deckmate Thermal Spacers on top of each purlin above the insulation blanket will ensure that sufficient room is allowed for the insulation blanket to recover its nominal thickness and that stated R values are achieved.


Dow PIR Tuff-R Thermal Insulation from Dynamic Composite Technologies Pty Ltd thumbnail
27-Nov-2012

Dow PIR Tuff-R Thermal Insulation

Dow Tuff-R polyisocyanurate (PIR) insulation available from Dynamic Composite Technologies is a non structural rigid insulation sheathing board consisting of a PIR foam core laminated between smooth, reflective aluminium foil facers on both sides.