IBL Batch Controller

IBL Batch Controller from Innovec Controls

By: Innovec Controls  06-Oct-2010
Keywords: Batch Controllers, Ausbuy, Contrec 414


The IBL Batch Controller is an 85 to 265VAC or 12-40 powered batch controller for liquids that incorporates a six (6) digit 18mm LCD (liquid crystal) display and integrated back light. The instrument can be configured from the front touch buttons to batch volumes from 0.001 to 999,999 litres and K factors from 999,999 to 0.01 can be utilised. The instrument can batch in up or down mode and provide the excitation power supply for the flow sensor.


ยท         Batch in local or remote mode up or down from set point

  • Simple touch switch programming with English statement prompts
  • Low cost - High performance
  • LCD display of 6 characters with 18 mm digit height and white LED backlight
  • Low flow alarm with batch cancel
  • Programmable end of batch signal with an end of batch pulse of 0.0 to 99.9 seconds
  • Background total
  • Programmable delay on relay two start and pre-stop
  • Batch set from front panel in programme mode or in run
  • Pulse output per litre
  • Dip switch selectable input: turbine, reed switch, open collector, Namur & logic
  • Applications include water treatment, dosing, food ingredient batching and bottling
  • Isolated sensor supply that can be adjusted from 8 to 20
  • RS232 port for ticket printer control
  • Plug in screw terminal electrical connections
  • K factor 999,999 to .01 and set point 0.001 to 999,999
  • 85 to 265VAC 47-63 Hz supply or factory fitted 12 to 40 isolated supply
  • CE conformity

Keywords: Ausbuy, Batch Controllers, Contrec 414, Flow Totalisor, Liquid Batcher,

Contact Innovec Controls


Print this page