This slide was designed to suit the Honda 2.0i Generator. Part of the EU_inverter series. The slide enable the generator to be located in a secure area, i.e. a side compartment in a camper, motor home or trailer, & slide out to operate. The generator can quite happilly operate on the slide as the runners are 120kg rated. The slide has a number of fixing features for the Honda.
(1)You can strap the Honda down to the slide with tie down straps to the loops front & rear of the tray
(2) You can padlock the Honda to the slide using the security cable that is generally supplied with it (or purchased separately)
(3) You can bolt the Honda to the tray using the bolts that screw through the rubber feet
The slide utilizes heavy duty (120kg rated) 3 stage over extension runners which allow the slide to be extended more than its tray length. This enable the generator to be exteded far enough from an enclosed space to be refuelled & connections made for the 240 outlets or 12 volt battery charger.
The tray of the slide is a little wider & a little longer than the body of the Honda 2.0 to allow for the protective cover that is often supplied with the Honda. This clearance also means there is no contact with the sides of the honda & the slide while running or travelling.