MHG flat-packed and perfect for transporting to anywhere in Australia.

MHG flat-packed and perfect for transporting to anywhere in Australia. from Magnetic Automation Pty Ltd - NSW

By: Magnetic Automation Pty Ltd - NSW  07-Aug-2015
Keywords: Security, Safety, Access Control

The MHG gate does not require tracks above or below the gate, significantly reducing the time taken for installation - approximately 2 days. This results in ease of installation for remote locations. There is a solar powered option where electrical supply may be a challenge. The gate takes up very little space for ease of transportation; it also does not require a crane or heavy lifting machinery to install. The MHG uses Magnetic’s reliable MSL 20 MCE gate motor as an economic alternative for commercial and security applications, whilst maintaining fast operating speeds. Magnetic can tailor the MHG to suit your requirements with availability in two heights – 2 metres and 2.5 metres – as well as lengths of up to 9.5 metres. We can provide different anti-climb accessories and gates can be powder coated for individual colour needs. For more information regarding our MHG gate or any other Magnetic Automation products, please contact our head office on 1300 364 864 or email [email protected]

Keywords: Access Control, Cantilever Gate, Magnetic Automation, Modular, Perimeter Protection, Safety, Security

Contact Magnetic Automation Pty Ltd - NSW

Email

Print this page

Other news and updates from Magnetic Automation Pty Ltd - NSW

25-Sep-2015

Perimeter protection solution

Magnetic’s MCG cantilever gate is the perfect solution for your perimeter protection needs.


Multi-functional swing gates for varied access types from Magnetic Automation Pty Ltd - NSW thumbnail
25-Sep-2015

Multi-functional swing gates for varied access types

Magnetic Automation installed two 5-metre MSG swing gates for a quarry site.


High duty cycle with minimal maintenance requirements from Magnetic Automation Pty Ltd - NSW thumbnail
25-Sep-2015

High duty cycle with minimal maintenance requirements

Magnetic Automation’s MHTM Parking Pro boom gates provided a solution for a major university car park.


25-Sep-2015

Dispersing of foot traffic

Magnetic’s MPT Full Height Turnstile is the perfect solution to minimise a rush of people to a particular area.


Fully customisable MCG XL cantilever gate from Magnetic Automation Pty Ltd - NSW thumbnail
25-Sep-2015

Fully customisable MCG XL cantilever gate

To accommodate a wide opening space for a coal export site, Magnetic Automation installed a 12-metre MCG XL cantilever gate with Magnetic's powerful MSL 20MC motor.


Secure, reliable & efficient from Magnetic Automation Pty Ltd - NSW thumbnail
25-Sep-2015

Secure, reliable & efficient

A 7 metre Magnetic track gate was installed at a distribution centre. The customer required an automatic gate to replace


Restricted gate run-off constraints from Magnetic Automation Pty Ltd - NSW thumbnail
07-Aug-2015

Restricted gate run-off constraints

Magnetic recently installed an off-set bi-parting MTG gate for a bus terminus yard.


Service and Preventative Maintenance program from Magnetic Automation Pty Ltd - NSW thumbnail
07-Aug-2015

Service and Preventative Maintenance program

A Preventative Maintenance Program is one of the most important aspects of any automation system. Performing proactive servicing can help to minimise the risk of breakdowns and associated safety issues.


07-Aug-2015

Pedestrian entry and exit system

Six Magnetic MPR retractable barriers were recently installed for a transport provider. The entry and exit points both had two standard width barriers and one wide width barrier to accommodate large volumes of traffic thoroughfare.


24-Jul-2015

Sustainable resource industry facility

Two STG heavy-duty cantilever gates and an MPT pedestrian turnstile were recently installed by Magnetic Automation for an oil and gas plant.


Solar powered vehicle traffic management solution from Magnetic Automation Pty Ltd - NSW thumbnail
24-Jul-2015

Solar powered vehicle traffic management solution

Solar powered vehicle traffic management solution - A Magnetic boom gate was installed in the staff car park of a health care facility.


26-Jun-2015

Long lasting products designed for harsh conditions

Magnetic recently completed a job for a gas plant construction site which included manufacturing and installing our MPP Pedestrian turnstiles.


Perimeter security for an airport service provider from Magnetic Automation Pty Ltd - NSW thumbnail
26-Jun-2015

Perimeter security for an airport service provider

The MTT Track gate is ideal for areas with restricted run-off area to accommodate the gate length requirement, with the layout of the site, this was the perfect solution for the client. The advantage of the telescopic design is that it allows approximately twice the opening width into a reduced run-off space.


Rail Stabling gates from Magnetic Automation Pty Ltd - NSW thumbnail
08-May-2015

Rail Stabling gates

Magnetic has developed a high security gate design for train stabling yards. The purpose of the gate is to prevent vandals and pedestrians accessing trains when they are not operational.