Carbolite Awnings - Bullnosed Window Awnings

By: Carbolite Polycarbonate Awnings  09-Dec-2011
Keywords: Uv Protection, Bracket, Polycarbonate Sheet

The bull nose itself is created by heat forming sheets. The sheet is placed in a heat forming oven which then heats and softens the sheet. The sheet is then wrapped around a barrel attachment and cooled.The end result is a perfectly formed curve. The radii is set at 380mm which is a very tight curve.

Bull nose awnings are perfect for areas where head height areas are limited as they can be placed on smaller falls. Recommended falls are

The awnings come in a variety of colour choices where you can mix and match. There are five (5) sheet choices of 8mm twin walled polycarbonate and four (4) aluminium joining bar colours. However, for an extra charge, we are able to powder coat to any special colour.

Each polycarbonate sheet with the H Bar is 725mm centre to centre. So 2 sheets starts at 1500mm wide and then simply add 725mm for each panel to determine the width you need. The sheets have UV protection on both sides of the sheets for greater protection.

The arm attachment is a simple bracket system. Simply fastened the bracket to the wall and the bracket slips into the 38mm RHS arm. The arms can be cut to any size on site to determine your pitch. Please see tech info for our installation guides.

For further information, please contact the office on (02) 9674 2500 and ask for sales.


Keywords: Bracket, Heat Forming, Polycarbonate Sheet, Uv Protection,

Contact Carbolite Polycarbonate Awnings

Email - none provided

Print this page

Other products and services from Carbolite Polycarbonate Awnings

09-Dec-2011

Carbolite Awnings - Window Awnings

With a wide array of shapes to choose from, we cover different styles using our unique hinge beam weather bar systems. All our awnings come with installation guides and are sold throughout Australia through our vast network of resellers. Most of our window awnings comply with BASIX (please note clear, bronze sheet polycarbonate awnings DO NOT). Window awnings are the perfect attachment for covering windows,doors to prevent weather penetration.


09-Dec-2011

Carbolite Awnings - Flat Window Awnings

So 2 sheets starts at 1500mm wide and then simply add 725mm for each panel to determine the width you need. There are five sheet choices of 8mm twin walled polycarbonate and four aluminium joining bar colours. Simply fastened the bracket to the wall and the bracket slips into the 38mm RHS arm. The sheets have UV protection on both sides of the sheets for greater protection.


09-Dec-2011

Carbolite Awnings - Domus Window Awnings

This does restrict the the ability to achieve that tight cafe style look however this is usually only applicable to the small projectioned awnings. So 2 sheets starts at 1500mm wide and then simply add 725mm for each panel to determine the width you need. Simply fastened the bracket to the wall and the bracket slips into the 38mm RHS arm. The sheets have UV protection on both sides of the sheets for greater protection.


09-Dec-2011

Carbolite Awnings - Gable Window Awnings

The system revolves around simple brackets bolted to the wall with the polycarbonate sheets attached on top. There are five sheet choices of 8mm twin walled polycarbonate and four aluminium joining bar colours. The gable window awnings are a simple way of adding lines to your door and window entries. This system allows the installer to set any angle they choose by adjusting the brackets.


09-Dec-2011

Carbolite Awnings - Patio Covers

The polycarbonate sheet is heat formed in our factory and the end of each sheet is heated and curved to the radius. All frames for our systems are engineered designed and approved to meet the most stringent standards. The aluminium used is a curving quality temper meaning it can be cured without stress. Please refer to our engineering page to view the patio cover frames. These member sizes vary depending on how far out the patio cover.


09-Dec-2011

Carbolite Awnings - Barrel Vault Awnings

The natural curve shape of the awning allows a more natural breeze way to occur allowing areas with limited space to control air flow. Barrel Vaults are constructed from curved aluminium box sections set to a radius to suit the sheet size and the application. All barrel vaults are using powder coated aluminium frames and 8mm twin wall sheets. Barrel Vault Awnings bring in the modern design with added function.