LOGICFLOW

LOGICFLOW from Trevi Engineering

By: Trevi Engineering  06-Jul-2011
Keywords: Water Pump, Pump Control, Float Switch

The device must be mounted in a vertical position.
In order to operate, the flowswitch requires a minimum flow that passes through it when a tap of the system is opened. For this reason the device and the system tap must be installed underneath the tank

It stops and starts the pump depending on the opening and closing of the system taps.

It stops the motor and saves the pump in the case of a water shortage.

Keywords: Float Switch, Pump Control, Pump Controlers, Reduce Water Hammer, Trevi Engineering, Water Pump,

Other products and services from Trevi Engineering

LOGICSTOP from Trevi Engineering thumbnail
06-Jul-2011

LOGICSTOP

The LogicStop is a simply way to protect your pump from running dry (water shortage) that can easily be installed without the need of an electrician. It acts as a electronic float switch for your water pump, this pump controller is easy to install and will protect your pump from running dry


LOGIC-SP-STP-TP from Trevi Engineering thumbnail
06-Jul-2011

LOGIC-SP-STP-TP

LOGIC Devices are the most technologically advancedand quality guaranteed in the global market of variable frequency drives. The structure of the hydraulic body and the quality of the materials allow toreach a protection index of IP65 and a resistant to water hammer up to 85 bar.   All screws are stainless steel to prevent from saltcorrosion. The water cooling system consist in a metal heat sink   which is large enough to permit operation atfull efficiency up to 60 ° C.