Non-Contact Phase Out Detectors

Non-Contact Phase Out Detectors from GL McGavin pty ltd

By: GL McGavin pty ltd  28-Feb-2011
Keywords: Electrical, Electrical Safety Testing, Contact

The Modiewark Non–Contact Phase OUT detectors can be used on inside applications up to 33kv on metal clad switch gear. This unit detects the same phase angle and activates a green led located on the master unit if the test sources are the same.

Phase out testers are not available with the self testing feature and are used only for phase out testing.

Keywords: Contact, Electrical, Electrical Power Safety, Electrical Safety, Electrical Safety Testing, High Voltage , High Voltage Testing, Modiewark, Non Contact Voltage Testers, Voltage, Voltage Testers,

Other products and services from GL McGavin pty ltd

Spout Tester from GL McGavin pty ltd thumbnail
28-Feb-2011

Spout Tester

The Modiewark spout tester is used specifically for the testing of live or dead spout applications up to 33kv. The


Mini rescue tester from GL McGavin pty ltd thumbnail
28-Feb-2011

Mini rescue tester

The Modiewark GLM Mini Rescue is a universal pocket size proximity tester, operating in the AC voltage range 20 volts


Modielive Modiewark tester from GL McGavin pty ltd thumbnail
28-Feb-2011

Modielive Modiewark tester

The ModieLive is designed to be used in conjunction with the Modiewark non-contact voltage detector. The Unit produces an EMF


Modiewark Non Contact Voltage Detector from GL McGavin pty ltd thumbnail
23-Nov-2010

Modiewark Non Contact Voltage Detector

Radiated field strength increases with voltage and decreases with earth shielding. The radiated field from a cable of closely bunched conductors supplied by three phase power tends to cancel. Detecting distance of a 240 volt single live wire is approximately 100mm and with a bunched neutral and earth, as a flexible cable, the distance is 50mm. Typical uses:- Identifying live conductors. Fault finding in flexible cables. Checking equipment grounding. Neon lighting servicing. Tracking liv