Modiewark Non Contact Voltage Detector

Modiewark Non Contact Voltage Detector from GL McGavin pty ltd

By: GL McGavin pty ltd  23-Nov-2010
Keywords: Electrical, Electricity, Electrical Safety Testing

The Modiewark is a non-contact voltage detector, which detects the presence of an alternating electric or electromagnetic field. Its unique switching action allows for the identification of alternating currents at a distance between 200 mm and 300 mm from a voltage source from 110 volts to 750,000 volts.

The Modiewark has been used by industry professionals since the early 70's for live or dead voltage determination of overhead power lines and underground power at the URD test point.

The Modiewark can also be used indoors on the 240/110 volt setting, tracing voltage sources from power distribution boards and cable fault detection.

The unique nature of the sensor plate within the unit allows for directional checks such as checking low voltage when high voltage is nearby. Induced voltages on isolated conductors are checked by increasing the Modiewarks sensitivity.

Keywords: Electrical, Electrical Power Safety, Electrical Safety, Electrical Safety Testing, Electricity, High Voltage , High Voltage Testing, Modiewark, Non Contact Voltage Testers, Voltage, Voltage Testers,

Other products and services from GL McGavin pty ltd

Spout Tester from GL McGavin pty ltd thumbnail
28-Feb-2011

Spout Tester

The Modiewark spout tester is used specifically for the testing of live or dead spout applications up to 33kv. The


Mini rescue tester from GL McGavin pty ltd thumbnail
28-Feb-2011

Mini rescue tester

The Modiewark GLM Mini Rescue is a universal pocket size proximity tester, operating in the AC voltage range 20 volts


Modielive Modiewark tester from GL McGavin pty ltd thumbnail
28-Feb-2011

Modielive Modiewark tester

The ModieLive is designed to be used in conjunction with the Modiewark non-contact voltage detector. The Unit produces an EMF


Non-Contact Phase Out Detectors from GL McGavin pty ltd thumbnail
28-Feb-2011

Non-Contact Phase Out Detectors

The Modiewark spout tester is used specifically for the testing of live or dead spout applications up to 33kv. The