DC UPS with Capacitor Storage

DC UPS with Capacitor Storage from Snaptec Australia Pty. Ltd.

By: Snaptec Australia Pty. Ltd.  07-Apr-2016
Keywords: Power Electronics, Rectifiers, Power Converters

Snaptec has introducted a new series of DC UPS units that work with built in ultra capactiors instead of an external battery. The Ctec range of DC UPS units technology is based on the use of the new range of ultracapacitors that provide very high capacity in a compact size. The capacitors are charged using an ac ord dc supply depending on the model and available supply while at the same time the load is supplied with the required dc voltage. In case of input supply failure the CTEC dc ups continues to supply the load from the energy stored in the ultracapaitors. The backup time depends on the size of the ultracapacitors used and the sate of charge of the capacitors when the power failure occurs. Typical capacitor sizes range from 500 joules to 10 kilo joules. The CTEC range of dc ups units with capacitor storage are available in 12V 24V and 48V voltages. Some of the outstanding features of a dc ups solution based on ultracapacitors is :

  • Compact design with no need for large external batteries.
  • Virtually maintenance free, expected to last for more than 10 years.
  • Operation under etreme high and low tempertures without threat of damage.
  • No gas emmsisions.
  • Fast recharge time for capacitors means fast availability.
  • Deep discharge protection for the capacitors.


  • There are two version of the CTEC DC UPS with ultracapacitors, one version provided regulation of the output voltage when in buffer mode, while the second version provides unregulated output voltage when in buffer mode. For further details please contact Snaptec.

    Keywords: Ac/Dc Power Supplies, Buffered Power, Dc Backup, Dc Ups, Power Converters, Power Electronics, Rectifiers,

    Contact Snaptec Australia Pty. Ltd.

    Email

    Print this page

    Other products and services from Snaptec Australia Pty. Ltd.

    New SWX 10 - 60 AC/DC Power Supplies with 24VAC Input 10W to 60W from Snaptec Australia Pty. Ltd. thumbnail
    21-Nov-2016

    New SWX 10 - 60 AC/DC Power Supplies with 24VAC Input 10W to 60W

    New AC/DC power supplies with 24VAC input and power rating from 10W to 60W with galvanic isolation


    Din Rail Mount Battery Holder 12V 7AH from Snaptec Australia Pty. Ltd. thumbnail
    28-Sep-2016

    Din Rail Mount Battery Holder 12V 7AH

    Din Rail Mount Battery Holder for 12V 7.2AH Batteries with built in fuse and screw terminal connection.


    NEW DC UPS MODELS FROM SNAPTEC AUSTRALIA from Snaptec Australia Pty. Ltd. thumbnail
    12-Nov-2014

    NEW DC UPS MODELS FROM SNAPTEC AUSTRALIA

    New Compact DC UPS Chassis Mount 12V 8A and 24V 4A


    New DC Electronic Load with grid feedback capability from Snaptec Australia Pty. Ltd. thumbnail
    25-Oct-2013

    New DC Electronic Load with grid feedback capability

    New programmable DC Loads , high efficiency with energy recycle by feeding back to the grid.


    New MPPT Solar Charge Controller From Snaptec Australia from Snaptec Australia Pty. Ltd. thumbnail
    25-Oct-2013

    New MPPT Solar Charge Controller From Snaptec Australia

    New Solar regulator (12V or 24V 50A) with very high efficiency , very fast maximum power point tracking (MPPT) and high input voltage up to 75VDC.


    Snaptec Australia AQF 360 AC/DC Ultra Compact Power Supply from Snaptec Australia Pty. Ltd. thumbnail
    17-Jul-2013

    Snaptec Australia AQF 360 AC/DC Ultra Compact Power Supply

    Snaptec Australia presents the AQF 360 AC/DC power supply, a highly efficient power supply with an Ultra Compact design and a High Power Density, the perfect AC/DC power supply for any projects space conscious and looking for a long term sustainable power solution.


    AC/DC Din Rail Power Supply 1 KW from Snaptec Australia Pty. Ltd. thumbnail
    03-Jul-2013

    AC/DC Din Rail Power Supply 1 KW

    High Efficiency compact 1KW 24V din rail mount power supply with single phase input


    SVC Series Variable Frequency Converters from Snaptec Australia Pty. Ltd. thumbnail
    10-Apr-2012

    SVC Series Variable Frequency Converters

    The SVC Series Variable Frequency Converters available now from Snaptec Australia


    Industrial Alkaline Energizer Batteries from Snaptec Australia from Snaptec Australia Pty. Ltd. thumbnail
    10-Apr-2012

    Industrial Alkaline Energizer Batteries from Snaptec Australia

    Energizer Industrual Alkaline Batteries available now from Snaptec Australia


    Din rail mount AC/AC transformers and power supplies from Snaptec Australia Pty. Ltd. thumbnail
    10-Nov-2011

    Din rail mount AC/AC transformers and power supplies

     Din rail mount industrial AC/AC transformers and power supplies 72VA


    19 Inch Rack Mount DC or AC Distirbution Panel from Snaptec Australia Pty. Ltd. thumbnail
    09-Nov-2011

    19 Inch Rack Mount DC or AC Distirbution Panel

     19 Inch Rack Mount DC or AC Distirbution Panel


    24 VDC Power Supplies from Snaptec Australia Pty. Ltd. thumbnail
    11-May-2011

    24 VDC Power Supplies

    New range of compact 24VDC power supplies for industrial applications


    Industrial Lithium Ion Battery Chargers 100W 250W 500W 750W from Snaptec Australia Pty. Ltd. thumbnail
    06-May-2011

    Industrial Lithium Ion Battery Chargers 100W 250W 500W 750W

    Industrial lithium ion battery charger for cyclic applications , power ratings from 100 to 750W , voltages from 12V to 120V


    High Power Variable Power Supplies 5KW 10KW 15KW from Snaptec Australia Pty. Ltd. thumbnail
    23-Sep-2010

    High Power Variable Power Supplies 5KW 10KW 15KW

    The new PS8000-3U is a range of high power industrial variable power supplies with a constant output power stage. Available in 3 power ratings of 5KW , 10KW and 15KW


    Contact details

    Unit 29 / 15 Valediction Road
    Kings Park, NSW, 2148,

    Main: (02) 9676 2344
    Fax: (02) 8569 0659