Snaptec Australia Pty. Ltd.
Dc Power, Ac/Dc Converters, Powersupply
The QS40.241 is a compact 1 kW single-phase, wide input voltage range power supply that has a housing width of only 125 mm and weighs 1.9 kg.
In addition to a high efficiency of 94.6% and a low loss performance over a wide range of loads, the power supplies are equipped with PULS ‘HiccupPLUS’ overload protection. This provides well-balanced power management that provides continuous output current repeatedly for 4 s on severe overload and protects mistakenly connected loads and cables against damage until the fault is cleared.
The full rated load current is available over the temperature range of -25 to 60°C as well as offering 50% of bonus power to accommodate short-term overloads during normal operation.
For easy fuse tripping, the unit provides multiples of the rated output current for 10 ms. The heavy-duty output cable clamps ensure an easy connection of cables with a cross-section of up to 10 mm2 (flexible). The international approval package and the wide input voltage range (100-240 VAC) enable the power supply to be used in applications worldwide.
Print this page
New AC/DC power supplies with 24VAC input and power rating from 10W to 60W with galvanic isolation
Din Rail Mount Battery Holder for 12V 7.2AH Batteries with built in fuse and screw terminal connection.
Industrial DC UPS Units with built in Ultracapcitors
New Compact DC UPS Chassis Mount 12V 8A and 24V 4A
New programmable DC Loads , high efficiency with energy recycle by feeding back to the grid.
New Solar regulator (12V or 24V 50A) with very high efficiency , very fast maximum power point tracking (MPPT) and high input voltage up to 75VDC.
Snaptec Australia presents the AQF 360 AC/DC power supply, a highly efficient power supply with an Ultra Compact design and a High Power Density, the perfect AC/DC power supply for any projects space conscious and looking for a long term sustainable power solution.
The SVC Series Variable Frequency Converters available now from Snaptec Australia
Energizer Industrual Alkaline Batteries available now from Snaptec Australia
Din rail mount industrial AC/AC transformers and power supplies 72VA
19 Inch Rack Mount DC or AC Distirbution Panel
New range of compact 24VDC power supplies for industrial applications
Industrial lithium ion battery charger for cyclic applications , power ratings from 100 to 750W , voltages from 12V to 120V
The new PS8000-3U is a range of high power industrial variable power supplies with a constant output power stage. Available in 3 power ratings of 5KW , 10KW and 15KW
Unit 29 / 15 Valediction RoadAustralia
Kings Park, NSW, 2148,Australia
Main: (02) 9676 2344Fax: (02) 8569 0659
Create your free Hotfrog business profile
Follow Hotfrog on:
Hotfrog Small Business Hub