40W CO2 Laser Power Supply

40W CO2 Laser Power Supply from Jinan Ruby Laser Technology Co.,Ltd

By: Jinan Ruby Laser Technology Co.,Ltd  24-Nov-2012
Keywords: Laser, Laser Cutting, Laser Marking

40W CO2 Laser Power Supply 1. Product Features: 1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with CO2 laser tube made by any factories. 2. This laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3. The laser output power can be adjusted by 0-5V analog signal or PWM signal. 4. This laser power supply has open cirsuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function can protect power supply when laser tube burst. 2. Aging test: Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qulified. 3. Specification: Input AC Voltage AC220V or AC110V Input DC Voltage DC 300V or DC150V Input AC Frequency 47-440Hz Max. Output Voltage 30KV Max. Output Current 20mA(Depends on Laser tube) Efficiency 91% Over Current Protection 130% of Max. Current Open Circuit Protection Yes (For short time) Cooling Fan Cooling Voltage Range of High Level Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours MTBF Not Less Than30,000hours Full Load 60 Degree Centigrade test 12Hours 7 Seconds Start/Stop Test 500 Times Dimension(LXWXH) 165mmx45mmx75mm

Keywords: 40w Co2 Laser Power Supply, Laser, Laser Cutting, Laser Marking, Power Supply,

Contact Jinan Ruby Laser Technology Co.,Ltd

Email

Print this page

Other products and services from Jinan Ruby Laser Technology Co.,Ltd

YAG Krypton Lamp Power Supply from Jinan Ruby Laser Technology Co.,Ltd thumbnail
25-Nov-2012

YAG Krypton Lamp Power Supply

krypton lamp power uspply


6/12KW YAG Pulsed Xenon Lamp Pumped Power Supply from Jinan Ruby Laser Technology Co.,Ltd thumbnail
25-Nov-2012

6/12KW YAG Pulsed Xenon Lamp Pumped Power Supply

YAG xenon lamp pump power supply


He-Ne Laser Power Supply from Jinan Ruby Laser Technology Co.,Ltd thumbnail
25-Nov-2012

He-Ne Laser Power Supply

He-Ne laser diode driver


YAG Pulsed Xenon Lamp Pumped power supply from Jinan Ruby Laser Technology Co.,Ltd thumbnail
24-Nov-2012

YAG Pulsed Xenon Lamp Pumped power supply

YAG Pused xenon lamp pump power supply


YAG LD CW  Laser Power Supply from Jinan Ruby Laser Technology Co.,Ltd thumbnail
24-Nov-2012

YAG LD CW Laser Power Supply

YAG ldcw pumped laser power supply for laser marking machine