John Morris Scientific
Seta Analytics’ new H2S Analyser provides rapid measurement of H2S in liquid petroleum products, including residual marine fuels, fuel oils and refinery feedstock components. H2S is removed from the test sample using a combination of heat and agitation, and is then measured using an advanced H2S specific detector system.
A small volume sample (i.e., between 1ml – 5ml) is dissolved into a specifically formulated diluent (volume 20ml). This is then heated, releasing H2S from the sample. Clean air is passed through the test vessel, removing any H2S gases into the sensor chamber where gas levels are measured and airflow through the sensor is monitored.
Sample analysis is fully automatic, and results are stored at the completion of each test.
* Reduced overhead costs – no expensive chemicals are required and there is no need for analytical preparation by an expert chemist.
* Reliable analytical tool that supports product quality control and safety, ensuring that products meet approved industry standards.
* Fast determination of H2S and rapid repeat sample measurement assist with product remediation treatment of feedstock component and off-spec products.
* Capability to measure particular crude oil and other distillate products
Suitable industries include: refinery and fuel blending locations; tank storage terminals; marine bunker fuel suppliers; product transfer inspection companies; and independent analytical laboratory services.
For further information on the H2S Analyser please contact John Morris Scientific on 1800 251 799 or email [email protected]