EVOLUTION-LX1 TIJ Inkjet Printer
Evolution Industrial Inkjet Marking Systems
Printing Equipment, Ink, Industrial
The EVOLUTION LX1 is complete and ready to install right out of the box The system includes the mounting bracketry, a hand held controller with tactile keypad for message entry, a printhead module with internal product sensor and power supply
Lexmark Inkjet Technology
EVOLUTION LX is driven with ink jet technology by Lexmark. This combination gives you the benefits of an affordable, compact and efficient design coupled with the reliability of printhead technology by Lexmark.
Optimum Print Resolution 300 or 600dpi
EVOLUTION LX delivers bold, highly legible and fully formed characters in a print resolution of 300 or 600dpiat production line speed of up to 60 metres per minute.
Built into the printhead is an internal ink reservoir. Once the ink in the cartridge is depleted, it can be taken out, disposed of and a new ink cartridge inserted in just seconds. The printhead drivers developed for the Lexmark cartridge deliver an approximate 20% increase in the number of printable characters and offer a greater printing distance compared to Hewlett-Packard inkjet cartridge based systems.
Breakaway Printhead Protection
A typical powered conveyor or case taper corrugated cartons can sometimes come through skewed or off centre. The horizontal adjusting rod that holds the printhead module has been designed with a breakaway feature that moves the printhead out of harms way should the carton come in contact with it. A detent in the assembly allows you to securely snap the printhead back into position after the misaligned carton has passed.
Systems start off as a basic system that will print either one line of 13mm high characters or two lines of 6mm high characters. No additional software is included as standard. There are a number of software options for the LX1 that add memory, extended message length, sequence numbering, time and date formats, and more.
This means the LX1 systems are the lowest-cost inkjet system available.
A unique feature of this printer is it's ability to "add-on". Each print-head has it's own on-board processor and memory. A hand-controller is needed to program the head, but once programmed and set to "print" - you can simply disconnect the hand-controller and use it to program a completely different head somewhere else. This means owning multiple printers becomes even lower cost than the first printer - since you need only to purchase an "add-on" head and possibly some bracketry.
Please contact EVOLUTION INKJET PRINTERS AUSTRALIA for more information, sample marking or a quote.
Coding & Marking Systems
, Industrial Inkjet
, Inkjet Coding
, Inkjet Marking
, Inkjet Printers
, Inkjet Printing
, Online Inkjet
, Printing Equipment
Contact Evolution Industrial Inkjet Marking Systems
Print this page