COM3300 Gateway for Rail Vehicles (EN50155)

COM3300 Gateway for Rail Vehicles (EN50155) from TESO Automation Products for Railway

By: TESO Automation Products for Railway  05-Nov-2012
Keywords: Maintenance Services, Plc, Control System Engineering

The COM3000 CANopen Communications Gateway (CANopen CG) is an advanced serial to CANopen gateway. The COM3000 is a low cost, high performance device that is used for connecting RS-232 devices to CANopen – it is perfectly suited for adding-on to existing PLC’s or programmable controllers and for the creation of slave CANopen controllers for existing applications. The device provides the complex implementation of the CANopen standards DS301 and DS401. On the CANopen bus side, the COM3000 CANopen CG simulates a CANopen slave node with protocol support for up to 256 digital inputs and 256 digital outputs, or 32 analogue inputs (8 bit) and 32 analogue outputs (8 bit). The Tx and Rx PDO’s can also be programmed to combine those AI’s, AO’s, DI’s and DO’s as required. The COM3300 is a serial RS232 to Wireless 802.11b gateway. A network of COM3300s can be configured with a private 802.11 network to connect multiple RS232 devices to a central PC or laptop. This has been used to connect to remote maintenance interface ports (HVAC, doors, brakes) in difficult to get-to locations.

Keywords: Communications Gateway, Control System Engineering, En50155, Ethernet Port, Maintenance Services, Man Machine Interfaces, Modular Plc, Plc, Plc Modular, Reporting Software, Supervisory Software-Scada, Telemetry Data Transfer, Wireless Data Couplers,

Contact TESO Automation Products for Railway

Email

Print this page

Other products and services from TESO Automation Products for Railway

05-Nov-2012

PC3 Series of PProgrammable Logic Computers PLCs (EN50155)

The PC3 has been designed specifically for high reliability applications such as the railway industry.


The IEC compliant programming workbench from TESO Automation Products for Railway thumbnail
05-Nov-2012

The IEC compliant programming workbench

The IEC compliant programming workbench is a complete programming environment used to develop highly portable applications.


PC1 range of programmable controllers (EN50155) from TESO Automation Products for Railway thumbnail
05-Nov-2012

PC1 range of programmable controllers (EN50155)

PC1 range of Programmable Logic Controllers (PLCs) - Australian Designed, tested, manufacturered and engineered for the harshed conditions to EN50155 standards.