Waterproofing Contractors, Concrete Waterproofing, Waterproofing Membranes
There are two keys to a perfect shower – the product must be level and square.
The one piece product is easy to level - just glue it directly to the substrate with a flexible sealant. Uneven substrates are overcome by packing low points with a tilers wedge.
Bathroom walls are not always square, therefore it is important to mark out where you would like to place Waterstop Streamline and trim the product to fit as required - a normal hack saw is suitable for this job.
If the product is required to be placed into a recess in the slab, it is best to specify a 30mm deep recess. Allowing an additional 50-100mm across the opening of your recess provides your concreter with a larger tolerance and reduces errors. The gap on the outside of the angle is easily filled with mortar by the tiler when laying the bathroom floor tiles.
Once Waterstop Streamline has been glued level and square, your waterproofer, tiler and shower screen installer then apply their products according to standard construction practices. Waterstop Streamline acts as a jig, providing an effective guide to these trades. However, it is still important to follow the installation instructions on the protective tape or phone Gleda for advice if unsure.
For more information visit our website: http://www.activeseal.com.au/
Or call us today on: 0406 002 240
Print this page
The product has been developed to fit in with current construction practices - it simply improves and streamlines the whole process and increases the performance of the other products. It is like a jig for building showers!
Switch to Waterstop Streamline and find out how easy it is to make every shower the same – perfect!
2 Martens PlaceAustralia
Abbotsbury, NSW, 2176,Australia
Main: 0406 002 240
Create your free Hotfrog business profile
Follow Hotfrog on:
Hotfrog Small Business Hub