GSM RTU FOR power system dynamic remote control monitoring system S271
Name: GSM 3G M2M RTU (4D+I4AI+4DO+1TH+1USB)
The GSM 3G M2M RTU is a multi I/O port remote terminal unit. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications.
Model 3G Precision DIN AIN PT100 DO Register Record Port
S270 V 12bit 2 2 0 2 X 200 USB
S271 V 12bit 4 4 0 4 X 200
S271-PT V 12bit 4 0 4 4 X 200 USB
S271-PTA V 12bit 4 2 2 4 X 200 USB
S272 V 12bit 8 6 0 4 X SD USB/RS232/RS485
S273 V 12bit 8 6 0 4 64 SD
S275 V 16bit 8 6 0 4 64 SD USB/RS232/RS485/RJ45
Notice 1. *C stands for inbuilt module is CDMA2000. *W stands for inbuilt module is WCDMA.
2. All of them support 1 temperature and 1 humidity inputs for environment monitoring.
1. ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system;
2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery;
3. Large internal memory for save 1000 historical data, USB port for configuration and upgrade firmware;
4. 4 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA;
5. 4 Relay outputs, 5A/30VDC,5A/250VAC;
6. 4 digital inputs, dry contact or level input. One of the input can be used as counter;
7. 1 temperature probe input, 1 humidity transducer input;
8. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network;
9. Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
10. Supports remotely restart the RTU, and configure it by SMS commands remotely;
11. Supports over voltage protection and phase-reversal protection;
12. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message.
14. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.