Plumbing - New South Wales - KURNELL 

All Valve Industries has just released a new range of AGA approved (licence 7517) flanged ball valves from 25mm - 200mm. Stock is now available. The Polix valve is a quality European product. It has a ductile iron body with stainless steel stem, PTFE seats and viton seals. It features a full bore design, is rated to 1600kPa and has a temperature range of -20°C TO 60°C. In addition, the Polix flanged ball valves have an optional adaptor for underground service, or can be adapted with a square d…

Conbraco in the United States manufactures a wide range of valves and fittings that are of good quality. Conbraco’s valves can be used for a number of applications in the marine, mining, industrial or other areas where corrosion is a concern. Some examples of valves are the l-port ball valve to be used on areas such as fuel tank selection, oil transfer and water tank selection to mention just a few.All Valve Industries stocks sizes 15 mm to 50 mm. The l-port ball valve has a bronze body, chro…

Save time and money on the easy solution to instantaneous water heater systems. Designed to allow a quick installation without having to use all those brass fittings, the new instantaneous water heater ball valve comes complete with a loose nut tail. Instantaneous water heater ball valves come with one DR watermarked and one AGA gas approved ball valve as a set. They are available in either flared or threaded connections.

The using of Pressure Reducing Valves is becoming more and more popular. This is largely as a result of the greater emphasis on saving water, plus the 500kPa maximum pressure requirements coming into effect as a national plumbing regulation. The Caleffi #535 series “dial-up” model, which is designed primarily for commercial and industrial applications, is now rapidly gaining popularity with a number of different sectors of the marketplace. Some advantages of the #535 series pressure reducin…

FIP is another Italian manufacturer who incorporates quality and innovation into their products. The FIP 3-piece ball valve features easy removal of the valve body from the system, allowing quick replacement of o-rings and ball seats without additional equipment. In the closed position, the pipeline can be disconnected downstream of the ball valve without leakage. The FIP PVC valves are suitable for numerous chemical and industrial applications where them best is demanded for severe service. Al…

The purpose of the pressure relief valve is to open automatically at a pre-set pressure to prevent equipment failure and for the safety of personnel. They are also fitted downstream of pressure reducing valves as a backup safety measure. For effective operation, the Series 80 valve should be set at least 10 percent above the normal working pressure. If the set pressure is too close to the working pressure, the valve will relieve unnecessarily when any fluctuations in line pressure occur. Featur…

The new Caleffi 3-way boundarypressure reducing valve has just arrived and is now available on the Australian market. It incorporates an additional port at the bottom of the valve to allow for various configurations. This innovation has primarily come about through a need for reducing valves to form the right angle at the boundary meter connection. The 3-wayboundary pressure reducing valve comes standard with a plug to seal one outlet, meaning the valve can be used in three different configurat…

The Apollo ‘Deadman’ ball valve provides a positive shut-off unless it is manually held open. This is particularly useful in situations where the there is a risk of the valve being left in the open position by the operator or where the valve must automatically close for safety reasons. Examples of this may be on fuel lines, chemical systems or on oil barrels. The valve body is available in three different materials. Bronze rated to 600psi Stainless steel rated to 2000psi up to 1 ¼” and 1500p…