Mobile Half- Frame Bulk Bag Discharger has Manual Dump Station, Flexible Screw Conveyor
Flexicon Corporation (Australia) P/L
Handling Equipment, Carbon Steel, Screw Conveyors
WACOL, QLD, AUS––A new Mobile Half-Frame Bulk Bag Unloader with multi-purpose hopper allows material to be discharged from bulk bags, manually tipped from sacks, and conveyed to downstream processes and storage vessels dust free.
For in-plant mobility, the system minimises weight and achieves a low centre of gravity by eliminating upper frame components, relying instead on the user's forklift or plant hoist to suspend the bag above the unit during operation.
The bulk-bag-to-hopper interface consists of a SPOUT-LOCK™ clamp ring positioned atop a pneumatically actuated TELE-TUBE™ telescoping tube, allowing dust-tight connections and unrestricted flow between the bag spout and hopper, as well as automatic tensioning of the bag as it empties to promote flow and evacuation. The telescoping tube raises the clamp ring assembly that seals the clean side of the bag spout to the clean side of the telescoping tube, and then lowers until the bag spout is pulled taut. Once the spout is untied, the telescoping assembly exerts continual downward tension on the spout, elongating the bag as it empties.
The high-integrity seal between bag spout and clamp ring allows full-open discharge from bag spouts of all popular diameters.
An integral BAG-VAC™ dust collector creates negative pressure within the dust-tight system to collapse empty bags prior to retying and disconnection, eliminating dust emitted during manual flattening of empty bags.
FLOW-FLEXER™ bag activators raise and lower opposite bottom edges of the bag at timed intervals, loosening compacted materials and promoting material flow into the bag discharge spout. As the bag lightens, the stroke of the bag activators increases, raising the bag into a steep "V" shape for evacuation of material.
For manual tipping in conjunction with, or independent of, bulk bag discharging, the operator raises a hinged bag-dump support shelf and a hinged hopper door, and pours material through a coarse screen into the hopper.
The integral flexible screw conveyor transports both free-flowing and non-free-flowing bulk materials including products that pack, cake, smear, seize or fluidise. The conveyor support mast cantilevers from the frame, and runs parallel to the conveyor tube, allowing the castor-mounted system to manoeuvre in restricted areas.
Units are available in carbon steel with durable industrial coating, or stainless steel to industrial, food, dairy or pharmaceutical standards.
The company also manufactures full-frame bulk bag dischargers, stand-alone flexible screw conveyors, pneumatic conveying systems, bulk bag conditioners, bulk bag fillers, bag dump stations, drum/box/container tippers, weigh batching and blending systems, and engineered plant-wide bulk handling systems with automated controls.
For information contact Flexicon Corporation (Australia) PTY Limited, 78 Westgate St., Wacol, QLD 4076, Australia, 1 300 353942, firstname.lastname@example.org, www.flexicon.com.au..
Bagging, Containers & Ibc
, bulk bag discharge
, Bulk Bag Discharger
, Bulk Bag Unloader
, bulk bag unloading
, bulk handling
, Bulk Handling Equipment
, Bulk Material
, Bulk Solid Materials
, Carbon Steel
, Handling Equipment
, Industrial Finishes
, Industrial Food
, Loading & Unloading
, Pharmaceutical Standards
, screw conveyor design
, Screw Conveyors
, Screw Feeders