Flexicon Corporation (Australia) P/L
Stainless Steel, Handling Equipment, Carbon Steel
A new TIP-TITE™ High-Lift Box/Container Tipper from Flexicon discharges dust-free into vessels 183 to 305 cm above the plant floor.
The tipper allows boxes and other containers to be loaded at floor level, sealed against a discharge hood, elevated and tipped, mating the hood outlet to a gasketted inlet port fitted to any receiving vessel.
The unit accommodates boxes from 915 mm to 1220 mm on a side and 990 mm to 1117 mm overall height.
The container platform is raised by a single hydraulic cylinder, creating a dust-tight seal between the top edge of the container and the underside of the discharge hood. A second hydraulic cylinder raises the platform-hood assembly vertically, before tipping it to a motion-dampened stop at 60 degrees beyond horizontal, causing the vertically-oriented hood outlet to mate with the receiving vessel's horizontally-oriented inlet port.
A pneumatic or manual slide gate valve prevents material flow until the discharge cone has been properly seated, and allows discharging at controlled rates.
The tipper is constructed of carbon steel with stainless material contact surfaces, and is also available in all-carbon-steel construction with durable industrial coatings, or all-stainless construction finished to food, pharmaceutical or industrial standards.
Optional receiving hoppers configured with the company's mechanical or pneumatic conveyors are available to transport discharged material to any plant location.
The company also manufactures drum tippers, drum fillers, bulk bag dischargers, bulk bag conditioners, bulk bag fillers, bag dump stations, weigh batching and blending systems, and engineered plant-wide bulk handling systems with automated controls.
For information contact Flexicon Corporation (Australia) PTY Limited, 78 Westgate St., Wacol, QLD 4076, Australia, 1 300 353942, firstname.lastname@example.org, http://www.flexicon.com.au.
Print this page
An all-new TIP-TITE® Sanitary Box Tipper from Flexicon forms a dust-tight seal between the container and the equipment, tips the container, and discharges bulk material at controlled rates.
New Flexicon Sanitary Tilt-Down Flexible Screw Conveyor fits tight spots, collects dust, and sanitises easily.
A new Manual Dump System from Flexicon collects dust generated during manual tipping, compacts empty bags, and conveys bulk material downstream.
A new Multi-Purpose Filler introduced by Flexicon, dispenses bulk solid materials into boxes, drums and bulk bags, by weight.
A new Mobile Half-Frame Bulk Bag Unloader with multi-purpose hopper allows material to be discharged from bulk bags, manually tipped from sacks, and conveyed to downstream processes and storage vessels dust free.
A new BLOCK-BUSTER™ Bulk Bag Conditioner loosens material that has solidified during storage and shipment, enabling bulk bag unloaders to discharge it through bag spouts.
A new Dual Bulk Bag Filling System from Flexicon integrates two Swing-Down® Bulk Bag Fillers with a Flexicon Pallet Dispenser and Powered Roller Conveyors, allowing safe, high capacity filling of bulk bags of all popular sizes.
A pneumatic gain-in-weight filling system for free-flowing bulk solids conveys and weighs the material, and discharges it into bulk bags.
A new Bulk Bag Filling Line from Flexicon automatically dispenses pallets, fills bulk bags, and accumulates filled bags for removal by forklift.
An automated Plant-wide Weigh Batching System engineered by Flexicon simultaneously weighs up to seven major ingredients and unlimited minor ingredients and conveys weighed batches to a downstream blender that feeds a bulk bag filler and a paper sack filling machine.
A new Single-Trip Bulk Bag Unloader from Flexicon allows rapid, low cost discharging in low headroom areas, and conveying of the material at any angle to downstream processing, storage or packaging equipment.
An all-new TIP-TITE (tm) Drum Dump Feeder from Flexicon seals drums against a discharge cone, tips the drum and feeds bulk material into downstream equipment, dust-free at controlled rate.
A new Bag Dump System from Flexicon collects dust generated during manual tipping and compaction of bags, and conveys bulk material downstream.
78 Westgate Street
Wacol, QLD, 4076
Tel: 1300 353942
Fax: 61 (0)7 3879 4183
Create your free Hotfrog business profile
Follow Hotfrog on:
Hotfrog Small Business Hub